Economical eddy current testing with latest digital electronic technology for automatic high resolution bi-channels on line or off line.

Flaw detection made of austenitic, ferrous and non ferrous steel metal.

Real time display of the process

Universal testing system, reliable for all applications and normative requirements (ASTM, API, DIN, SEP…)

>Generated signal specifications

* Generated frequencies : 0.1 to 25 MHz

* Signal :

_ Continuous sine wave

_ string of 11 sinusoid bursts

_ 1 sinusoid (synchronized on ultrasonic pulse)

* Output impedance 50 Ohms

* Output level not loaded 0 mV to 2.6 V

* Output level loaded with a charge of 50 Ohms 0 mV to 1.3 V

* Auto-calibration mode integrated

* Output signal protected from pulses (maximum absorbed continue power : 1W in 30 Ohms)

>11 sinusoid sursts mode specifications

* Synchronized on ultrasonic instrument pulse

* Setting of the width of sinusoid bursts (resolution 25 ns)

* Setting of the position of sinusoid bursts (resolution 25 ns)

* Interval setting between sinusoid bursts, while keeping the position of the second pulse

* Setting of output level

>Specifications of 1 sinusoid mode

* Synchronized under the ultrasonic instrument phase

* Setting of sinusoid position, while keeping the phase of the sinusoid (resolution 25 ns)

* Setting of sinusoid phase (resolution 0.002°)

>Specifications of the integrated attenuator

* Minimum alleviation : 0 dB

* Maximum alleviation : 100 dB

* Resolution : 0,01 dB

* Auto-calibration mode : integrated

>Input pulse specifications

* Impedance : 60 Ohms integrated

* Maximum absorbed continue power : 5W in 50 Ohms (40W for short durations)

* Maximum pulse tension 1000 W

>Specifications of PC interface

* IEEE1284 EPP mode

* Sub D25 female connector (IEEE1284A)

* Transfer speed : 1 MB./s max.

* IEEE1284 A-A cable

>Dimensions

* Height : 85 mm

* Width : 230 mm

* Depth : 180 mm

>Weight

* 1300 g

The UTScan-100 is an all-in-one, full-featured PC based industrial ultrasonic instrument for in factory usage. Employing 32-bit PCI architecture, instrument operation is made fast and easy via windows based inspection screens and intuitive dialogue boxes for ultrasonic setup.
Configurable with either single or multi-channel front-end square wave pulser/receivers, the UTScan-100 is expandable up to 32 independent ultrasonic channels and programmable I/O ports.
The UTScan-100 delivers: 95dB true instrument gain, 50dB DAC, 35MHz analog bandwidth and ample storage for virtually an unlimited number of setup files for different transducers and inspection plans.

- Product applications : Flaw detection in metals, composites and plastic materials, Wall and clad thickness measurements, A and B-scan evaluation
Typical applications include : Forgings , Billets | Plates | Rolls | Pipes | Automotive | Train rail and wheel

The electronic UTR is a high accuracy ultrasonic inspection system, for in line high speed flaw detection and dimensional measurements of ID / OD / thickness. It is intended to operate with UTR rotating heads:

It is an all-in-one, full-featured PC based industrial ultrasonic instrument for in factory usage. Employing PCI architecture, instrument operation is made fast and easy via windows based inspection screens and intuitive dialogue boxes for ultrasonic setup.

Configurable with several (depending on the configuration request) USPC7100i single channel ultrasonic PCI card, firing in parallel at 20 KHz PRF:

Example :
2 channels for longitudinal flaws Internal / external in CW and CCW
2 channels for transversal flaws Internal / external in CW and CCW
Flaw size : min 0,07 mm depth and 1,5 mm lng
5% or 10% of thickness according to diameter range and standards to be applied
BNC analog outputs 0-5V, 2 per Flaw Gate
- one updated at PRF rate
- one with adjustable time delay up to 10 ms
- rejection with linearity upholding
BNC alarms outputs Go/No-Go, 1 per Flaw Gate