Convention forming mills are available to meet customers requirement from 8.0 by 0.6mm to 355 by 12.7 mm. Configuration out side this range are available on request. Standard and Sub Plate mounted (Rafted) versions are available. Refer to H-Set Tube & Pipe
Suitable for HF, TIG and Laser mills manufacturing most materials.
Precise, reliable and rugged machines designed to maximise the advantages of the conventional mill with out the cost of the high productivity fast change over machines.
The rotary sizing mill consits of two sets of rollers (cages) that are set at an angle to the tube to produce a cone. The tube is feed through the cone by the rollers and results in the reduction of the tube diameter. Replaces the sizing section on the tube or pipe mill.
Suitable for the sizing of all round tube from 30mm to 650mm wall thickness 0.8 to 16mm at speeds up to 150mpm.Suitable for all materials. Some limitation apply. Not suitable for high speed ERW mills below 105 mm.
The advantages are; the machine is smaller with a lower capital cost, tooling and operating cost; tooling is adjustable and can manufacture all sizes within its operating range with improved accuracy; surface finish of the incoming strip is improved by 30 %; tooling is of a simple design and very quick to change; the cold work is reduced and energy savings are considerable.
Download the technical paper published in 2006 March/April issue of Tube &Pipe technology.
Product category: Tube rolling mills, Sizing mills
Roll Cassette mill
This format is of a 4 roll configuration with the rolls housed in a cassette. The cassettes can be quickly removed from the mills stand and replaced. The stands are single piece units that are permanently part of the mill.
Suitable for Pipe, Structural and Large Mechanical mills Using cold roll, hot rolled picked, hot rolled black strip and coated strip.
Simultananeous Change over of all stands. Offline set up of rolls, Higher rigidity, High precision, improved change over times, high quality tube forming.
Our company, KUSAKABE Electric and Machinery Co.,Ltd was found in 1916 and began its involvement with the tube and pipe industry in 1959. A full range of Tube and Pipe mills and associated equipment is available for all sectors of the tube and pipe industry. The many years of tube and pipe experience and know-how coupled with an innovative design team and the high quality workmanship of the manufacturing and installation teams has made Kusakabe a leading and inventive tube and pipe mill and associated equipment supplier. Kusakabe mills and associated equipment is operating in at least 26 countries and with a strong customer base in Japan has grown and developed by meeting and exceeding the expectation of its customers. Research and Development activities are constantly bringing to the market new products, concepts and improvements that allow our customers to not only face the challenges of the industry but to also become leading, responsive and efficient manufacturers of tube and pipe. for the past 47 years, with equipment operating in more than 26 countries. New ideas and concepts are continually being developed by Kusakabe to address the challenges faced by tube and pipe manufacturers around the world. It is a strong group of professional engineers. Their workmanship has been supporting and maintaining the company. Those loyal workers share our company philosophy.