Aztech Lubricants LLC

29047 State Highway 59, 73095 Wayne, OK
USA
Telephone +1 405 3100034
Fax +1 866 2510666
info@aztechlube.com

Hall map

wire 2018 hall map (Hall 9): stand F06-02

Fairground map

wire 2018 fairground map: Hall 9

Our range of products

Product categories

  • 03  Auxiliary process technology materials
  • 03.01  Lubricants
  • 03.01.01  Oils, greases, lubricants

Oils, greases, lubricants

  • 03  Auxiliary process technology materials
  • 03.01  Lubricants
  • 03.01.02  Auxiliary drawing materials
  • 03  Auxiliary process technology materials
  • 03.01  Lubricants
  • 03.01.03  Process lubricants

Process lubricants

  • 03  Auxiliary process technology materials
  • 03.10  Other chemicals
  • 03.10.03  Protective agents

Protective agents

Our products

Product category: Auxiliary drawing materials

Calcium Drawing Powders

EZDraw 99T
A medium rich powder containing an extreme pressure additive with additional lubricity agents to enhance lubricant pick
up on descaled rod. Recommended for rod breakdown. Also used for drawing coated alloy rod.

EZDraw 19
A good general purpose soap for use on all carbon steels. Contains extreme pressure additives and is in the medium rich range. Recommended for use on both chemically cleaned and mechanically descaled rod and wire.

EZDraw 57
A medium rich powder containing an extreme pressure additive with additional lubricity agents to enhance lubricant pick
up on descaled rod. Recommended for carbon steel rod breakdown. Also used for drawing coated alloy rod.

EZDraw 39
A lean calcium soap powder containing an extreme pressure additive and additional lubricity agents to enhance lubricant pick
up on descaled rod.

EZDraw 95
A medium rich drawing powder containing lubricity agents to enhance lubricant pick
up on descaled rod. Recommended for carbon steel rod breakdown and drafting coated and uncoated carbon steel.

EZDraw 58
A medium rich calcium soap recommended for high speed, multiple
hole drawing of carbon steel rod and wire. Typical applications include welding or lacing wire.

EZDraw 80
A moderately rich soap powder containing extreme pressure and lubricity enhancers for drawing high carbon and stainless steel. Commonly used in the first several die boxes for rod breakdown followed by a rich, sodium soap on a high speed multihole draw.

More Less

Product category: Oils, greases, lubricants, Auxiliary drawing materials, Process lubricants

Copper wire drawing products

EZDraw CP10
A concentrated copper rod and wire drawing lubricant containing specialty lubricity additives, emulsifiers, corrosion inhibitors, and biocide. It is designed to offer optimum performance in most drawing applications and is expressly formulated to minimize build up and foam in drawing machines.

EZDraw CP40
A highly concentrated semisynthetic copper rod and wire drawing lubricant containing new specialty lubricity additives, emulsifiers, corrosion inhibitors, and biocide. It is designed to offer optimum performance in most drawing applications, most
types of water and is specifically formulated to keep your system clean, be very pH stable and running for an extended amount of time.

EZDraw CP90
A highly concentrated synthetic copper rod and wire drawing lubricant containing newly developed lubricity additives, emulsifiers, corrosion inhibitors, and biocide. It is designed to offer optimum performance in most drawing applications,
most types of waterand be very pH stable. It is also specifically formulated to keep your system running clean and extend your bath life, while leaving the wire surface very clean for processing.

EZDraw CQ1
A soluble oil recommended for use as a quench water additive for the continuous annealing of nonferrous wire. It is a blend of emulsifiers, water conditioners, corrosion inhibitors, and lubricating ingredients. This product prevents water spotting and
preserves a bright, clean finish on nonferrous wire coating them with a very light protective film.

EZDraw EMULS9
A concentrated blend of emulsifiers and pH buffers that when added to a lubricant system will improve detergency and stability properties of the solution. Using it will help extend lubricant solution life and enhance system cleanliness, metal wetting and
fines filtration.

EZDraw PHU
A mild alkaline neutralizer and pH buffering compound for lubricant emulsion systems.

More Less

Product category: Auxiliary drawing materials

Sodium Drawing Powder

EZDraw 595
A rich sodium high melting point soap powder recommended for use on more severe drafting applications or where less than effective die and block cooling exists. Used for high speed drawing applications on both high carbon and stainless steel, or
sometimes used with one of the calcium based ripper box lubricants.

EZDraw 216
A high fat content sodium soap containing very few additives to promote a clean finish. Used for one three hole draws where very clean finish is need for plating.

EZDraw 540
A medium rich sodium soap containing lubricity and thermal stability additives. For use on a broad range of coated and uncoated
carbon steels.

EZDraw 520
A medium rich sodium soap containing lubricity and thermal stability additives. Formulated to carry up to 14 holes at higher speeds. For use on a broad range of coated or uncoated carbon steels.

EZDraw 340
A medium rich, borax free sodium soap containing lubricity and thermal stability additives. For use on a broad range of coated or uncoated carbon steels prior to galvanizing.

EZDraw K11
A medium rich potassium soap containing lubricity and thermal stability additives. For use on a broad range of coated or uncoated carbon steels leaving a residual that will enhance resistance welding on the wire.

EZDraw 547
A medium rich sodium soap containing lubricity and thermal stability additives with a specialty film thickener for added die life. For use on a broad range of coated or uncoated carbon steels.

More Less

About us

Company details

Founded in 2005, Aztech Lubricants offers its customers over 125 years of cumulative expertise in wire drawing and wire lubricating formulation.   We are proud members of WAI and AWPA.

Aztech Lubricants provides quality products and innovative solutions to customers in the wire drawing industry for a variety of industries including:  wire drawing, galvanizing, wire forming, agricultural, tires, automotive, construction, etc.  We are fully committed to making a positive impact on the environment and use plant based and renewable sources when feasible.  Our product range includes an extensive line of wire drawing lubricants and supplies for wire drawing.   We specialize in the formulation and production of calcium, sodium and potassium stearate drawing powders, RP oils, ship out oils, drawing oils, and precoats (both enhanced borax and borax free). Additionally, we can provide our customers with products such as galvanizing wiping pads, UV coatings, and AZWipe spiral brushes, through established partnerships with the companies that specialize in these areas.  Our global presence consists of international manufacturing and distribution facilities in both Colombia and India. 

Situated in the heart of Wayne, Oklahoma is a 40,000 sq. foot manufacturing facility, which includes an in-house laboratory for QC and R&D.  We are customer focused and offer vast technical expertise in formulating customized products to best suit your specific application. The location of our production facility and warehouse provides convenient access to all modes of transportation for both domestic and international shipments. We maintain sufficient inventory levels at all times on our core products, thereby enabling us to ship most orders the same day or very next day. 

More Less