BHH Mikrohuta Sp. z o.o.

Katowicka 11, 42-530 Dabrowa Gornicza
Poland
Telephone +48 32 2618277
Fax +48 32 2618277
r.bosio@mikrohuta.pl

This company is co-exhibitor of
ACCIAIERIE VALBRUNA S.p.A.

Hall map

wire 2018 hall map (Hall 12): stand C60

Fairground map

wire 2018 fairground map: Hall 12

Our range of products

Product categories

  • 04  Materials, special wires and cables
  • 04.04  Speciality wires made from
  • 04.04.10  Stainless steel

Stainless steel

  • 04  Materials, special wires and cables
  • 04.04  Speciality wires made from
  • 04.04.11  Special steels
  • 04  Materials, special wires and cables
  • 04.05  Application-specific speciality wires for
  • 04.05.02  Springs

Springs

  • 04  Materials, special wires and cables
  • 04.05  Application-specific speciality wires for
  • 04.05.15  Cold drawn steel

Cold drawn steel

  • 04  Materials, special wires and cables
  • 04.05  Application-specific speciality wires for
  • 04.05.16  Profiled wire

Profiled wire

Our products

Product category: Special steels

Austenitic Cr-Ni steels

Mikrohuta produces wires and drawn bars in austenitic chromic-nickel of various grades.

We offer the various surfaces of wires and drawn bars:
  • shiny
  • bright
  • degrease
  • soap / bonder coated


BHH Mikrohuta produces high-quality wires, drawn and ground bars in stainless, acid-resistant, heat-resisting and electric-resistor steel grades.

Youcan find in our offer round dry and wet drawn sections as well as flat cold rolled wires.

Wires during the manufacturing process are subjected to intermediate heat-treatment, annealing in a controlled atmosphere in a mixture of dry hydrogen and dry nitrogen in order to prevent damage to a relatievely bright surface by scaling or oxidation during annealing.

Size range of produced wires starts from 0,2 mm up to and including to 8,0 mm while, bars size range starts from 2,0 mm up to and including 6,0 mm.
Bars are available in random lengths or other on request.

A new drawing facility being actually in assembly will let BHH Mikrohuta to enlarge the tinner wire size range starting from 25 µm.

More Less

Product category: Special steels

Austenitic Cr-Ni-Mo steels

Mikrohuta produces wires and drawn bars in austenitic chromic-nickel-molybdenic steel of various grades.

We offer the various surfaces of wires and drawn bars:
  • shiny
  • bright
  • degrease
  • soap / bonder coated
BHH Mikrohuta produces high-quality wires, drawn and ground bars in stainless, acid-resistant, heat-resisting and electric-resistor steel grades.

You can find in our offer round dry and wet drawn sections as well as flat cold rolled wires.

Wires during the manufacturing process are subjected to intermediate heat-treatment, annealing in a controlled atmosphere in a mixture of dry hydrogen and dry nitrogen in order to prevent damage to a relatievely bright surface by scaling or oxidation during annealing.

Size range of produced wires starts from 0,2 mm up to and including to 8,0 mm while, bars size range starts from 2,0 mm up to and including 6,0 mm.
Bars are available in random lengths or other on request.

A new drawing facility being actually in assembly will let BHH Mikrohuta to enlarge the tinner wire size range starting from 25 µm.

More Less

Product category: Special steels

Ferritic Cr steels

Mikrohuta produces wires and drawn bars in ferritic chromic steel of various grades.

We offer the various surfaces of wires and drawn bars:
  • shiny
  • bright
  • degrease
  • soap / bonder coated
BHH Mikrohuta produces high-quality wires, drawn and ground bars in stainless, acid-resistant, heat-resisting and electric-resistor steel grades.

Youcan find in our offer round dry and wet drawn sections as well as flat cold rolled wires.

Wires during the manufacturing process are subjected to intermediate heat-treatment, annealing in a controlled atmosphere in a mixture of dry hydrogen and dry nitrogen in order to prevent damage to a relatievely bright surface by scaling or oxidation during annealing.

Size range of produced wires starts from 0,2 mm up to and including to 8,0 mm while, bars size range starts from 2,0 mm up to and including 6,0 mm.
Bars are available in random lengths or other on request.

A new drawing facility being actually in assembly will let BHH Mikrohuta to enlarge the tinner wire size range starting from 25 µm.

More Less

About us

Company details

Mikrohuta has been founded in 1973 and it is specialized in the manufacturing of stainless steel and nickel alloys products.

It is a leader in the polish market in the production of drawn steel products. To consolidate the leader position in the market and with the aim to fully meet our customer’s demand we have implemented a wide investment program in modern technology which has permitted significantly improve the quality of our products.

Thanks to a wide dimmensional range, Mikrohuta’s products are suitable to be employed in many industrial compartments: grids and furniture, cold forging, welding, car manufacturing, building, health supply, agricultural and food compartment and textile.

Heat treatment modernization by the substitution of the ammonia with the hydrogen and nitrogen, has alolwed to reach an higher quality standard and better environment protection.

Mikrohuta guarantees the high quality of the base material and thanks to the new tehnologies and to the efficient customer service, the Company can meet all customers expectations in terms of quality and deliveries.

More Less