DCSENG CO., LTD.

12, Jukjeon-ri, Hyeondo-myeon, Seowon-gu, 28214 Cheongju-si, Chungcheongbuk-do
Korea, Republic
Telephone +82 43 256-0945
Fax +82 43 256-0946
sales@dcseng.co.kr

Hall map

Tube 2018 hall map (Hall 6): stand J19

Fairground map

Tube 2018 fairground map: Hall 6

Contact

Junghwa Lee

Phone
+82-10-2489-3800
+82-43-256-0945

Fax
+82-43-256-0946

Email
sales@dcseng.co.kr

Our products

Product category: Tube processing and finishing equipment

The most cost-effective orbital cutting machine(S-100LT/150LT/200LT)

The most cost-effective orbital cutting machine, having the best cost-to-benefit ratio!
Capacity: 1/4'' ~ 8'' (Pipe O.D 6㎜ ~ 220㎜)
Pipe thickness Maximum 8.2t

 1. Maximized user convenience
    - Easy to replace cutting blades
    - Effective and convenient in processing short pipes
    - Possible to cut elbows
    - Mounted basically with a stopper for cutting and beveling
    - Maximized convenience of repeated work

2. Optimally designed for the processing of thin pipes
    - Changes in pipes are minimized.
    - Minimum distances are secured between cutting/beveling blade and vise (fixed jaw).

3. Possible to fine tune processing depths
    - Improved quality in cutting and beveling
    - A one-touch adjustment device

4. Clamping of O.D 1/4 inch ~ 8 inch at a time
    - No need for an ancillary vise (vise jaw)
    - Shortened working time

5. Equipped with a BLDC motor
    - Providing stable torques across the range and ensuring high reliability.
    - Adjusting speeds according to work types with a 6-stage control.
    - Having a built-in overload protection circuit.

6. Oilless bearing applied to the main shaft
    - The durability of the equipment is improved.
    - The looseness of the equipment is minimized.

More Less

Product category: Tube processing and finishing equipment

World best easy and speed cutting machine (S-150)

Things are cut, whether thin or thick, at a single stroke!
World best easy and speed!
Machine Capacity : 3/8'' ~ 6''
(Pipe O.D 16mm ~ 170mm)
(When using collect O.D 6.35mm ~)

1. Maximizing user convenience with auto rotation
    - Thick pipes are cut in right direction and beveled
    - Thin pipes are cut in reverse direction (spiral duct cutting available)

2. Clamping at a time up to O.D 16mm ~ 170mm

3. Envolved into a new orbital type

    - Main axial motor mounted onto the body (to prevent ejection while working)
    - In semi-permanent design for zero backlash

4. Able to freely adjust of blade while cutting and beveling

5. Welding holder mounted (butt welding)
    - Semi-automatic welding realized for thin tasks

More Less

Product category: Tube processing and finishing equipment

Using rotation cutting method of pipes for the first time in the world(S-500)

Necessary for stainless piping work!
Using rotation cutting method of pipes for the first time in the world!
Machine Capacity : 3/8'' ~ 20'' (Pipe O.D 16mm ~ 510mm)

1. Maximizing user convenience with auto rotation

2. Able to cut up to 16mm ~ 510mm and conduct beveling with one machine!
    - 3/8'' ~ 2'' : Vice clamping method
    - 2'' ~ 20'' : Chain clamping method
    - May use up to 24'' (please contact head office)

3. Blade catch preventer installed (exceptionally usefull in large diameter)

4.  Minimize eccentricity while cutting and beveling

5. Able to freely adjust of blade while cutting and beveling

6. Equipped welding holder
    - Implementation of the semi-automatic welding thin pipe

More Less

Product category: Tube processing and finishing equipment

Dual Cutting & Beveling Full Automatic Machine (S-300HV/600HV)

Necessariness of a pipe processing factory!
Possible to cut and bevel them on both sides at the same time (CNC M/C)
Machine Capacity : 2'' ~ 24'' (O.D 60mm ~ 620mm), Maximum 80t

First time in the world!
Dual Cutting & Beveling Full Automatic Machine

1. Dual cutting sides and chamfering off; not required a machine tool of cutting of chamfering

2. The minimum working space through straight production

3. The maximum convenience; equipped with auto tool change 6 tool holder

4. The embodiment of various shaping processing; 8-axis servo motor

5. The auto feeder of pipe / centering function

6. The auto oil pressure revision system; the minimum deformation through chuck pressure depending on the type of pipes

7. Tool Pre-setter / Chip Conveyer / Coolant System

More Less

Product category: Tube processing and finishing equipment

Portable hand beveler (S-CM4_M), Portable plane processing machine(S-CM4_OD)

Portable hand beveler (S-CM4_M)
Pipe and board film removal ( outer diameter) or beveling process

• Bevel Capacity : 0' ~ 90', 0 ~ 14C
• Pipe/Board : Flat processing(removal of outside diameter film) and bevel processing

Portable plane processing machine (S-CM4_OD)
• Processing Capacith : 48mm of maximum width, 15mm of maximum depth
• Pipe / Board : Film removal (outside diameter) and flat processing

More Less

About us

Company details

Founded by young founder who cherishes the dream of "technological development based on respect for humans and environment-centeredness," DCS (Dream, Challenge, and Success) ENG has made S-Cutter exclusively used for pipelines.

We believe that our convenient and efficient system that can freely meet any standards and materials with features necessary for pipeline installation work such as cutting, beveling, and prefab welding will fascinate you.

Our clean and comfortable working conditions for the safety of users and quick and precise workmanship will help raise competitiveness of companies. In addition, we will present an alternative to supply drinkable water in a clean and safe manner and take the lead in increasing profitability and protecting expensive equipment in industries.

We will continue our effort to become your partner that can help you step forward for your dream.

Thank you.

More Less

Company data

Sales volume

1-9 Mio US $

Export content

max. 25%

Number of employees

20-49

Foundation

2008

Area of business

Tube industry

Company information as a PDF file