Kinkelder B.V.

P.O. Box 242, 6900 AE Zevenaar
Nijverheidsstraat 2, 6905 DL Zevenaar
Netherlands
Telephone +31 316 582200
Fax +31 316 582217
info@kinkelder.nl

Hall map

Tube 2020 hall map (Hall 6): stand C32

Fairground map

Tube 2020 fairground map: Hall 6

Our products

Product category: Saw blades

Kinkelder TCT SpeedMaster

SpeedMaster is a TCT saw blade for flying cut-off applications on tube mills. It provides an opportunity to greatly increase the tube manufacturing line speeds and cut the production costs. Where cutting speed limits of coated HSS saw blades have been reached, SpeedMaster saw blades provide an effective solution.

Advantages
  • Extremely high line speed because of very short cutting times
  • Very good surface finish, burr-free cut
  • Increased uptime
Applications
  • Single and twin flying cut-off machines designed for TCT cutting with small or no ID-scarf
  • Tubes with a tensile strength up to 1.000 N/mm2
  • Cutting speed: 350 m/min (starting value).
  • Tooth load 1/2/3: relation 1/2/0.8. 0.05/0.10/0.04 mm/tooth.

More Less

Product category: Saw blades

TCT ScarfMaster

The PVD coated carbide tipped ScarfMaster has especially been designed for flying cut-off applications dealing with heavy inside scarf. It features a very specific tooth geometry, combined with highly shock resistant carbide tips. Due to strong saw body shoulders which give the teeth maximum support, the combination tooth/body obtains very high stability and fracture resistance. Extended blade life is therefore achieved.

Advantages
  • High line speed
  • Increased uptime
  • High blade life
  • Cuts heavy ID scarf
  • Cuts high tensile API Pipes (up to 1.800 N/mm2)
  • Various tooth geometries available
Applications
  • Flying cut-off applications dealing with heavy ID Scarf
  • Cutting speed: 400 – 500 m/min (choose max available).
  • Tooth load 1/2/3: relation 1/1/1. Starting value 0.04 mm/tooth.
  • ScarfMaster saw blades are available for flying cut-off machines, such as MTM, OTO mills, Nakata and Olimpia.

More Less

Product category: Saw blades

TCT TubeMaster

TubeMaster saw blades have especially been designed for orbital flying cut-off applications on tube mills. Key features of this saw blade are fractureresistant carbide tips, protected with a high-tech TiAlN-based PVD coating. 

Combined with a light cutting geometry for smooth chip evacuation, a milled like surface finish is achieved. This geometry also reduces vibration when cutting thin walled tubes (<4mm), thereby achieving excellent blade life. The new generation of TubeMaster products has a new body design, new carbide grade, new tip geometry and a special coating. This results in a higher blade life and more regular blade performance.

Advantages
  • High line speed
  • High blade life
  • Cuts high tensile API Pipes (up to 1.000 N/mm2, X80, HT)
  • Burr-free cut
Applications
  • Orbital, flying cut-off applications
  • Suggested cutting speed: 350 – 400 m/min. Feed 1/2: 0,04 / 0,12 mm/tooth.
  • TubeMaster saw blades are available for all types of orbital cutting machines, such as MTM, OTO mills, Elmaksan, Kusakabe, Linsinger, Nakata and SMS Meer

More Less

Product category: Saw blades

TCT Champion SL

The Champion SL saw blade achieves extended blade life at solid cutting by combining the performance advantages of Cermet with the latest PVD coating technology.

Advantages
The Champion SL saw blade offers the following benefits:
  • High blade life on solid cutting
  • Low noise
  • Smooth surface
  • Low cost per cut
Applications
  • High performance cutting of low and medium strength solid steel bar with high requirements on surface quality and straightness
  • Cutting of solid steel bars from 400 to 800 N/mm2
  • Cutting speed: 100 – 280 m/min
  • Tooth load: 0.04 – 0,11 mm/tooth.
  • Machines: Soco, Rattunde, Kasto, Nishijima, Tsune, Behringer, Mega, Exactcut, Everising, etc.

More Less

Product category: Saw blades

TCT Champion TL

The Champion TL saw blade has been designed to cut tubes with tensile up to 850 N/mm2 on high output / high quality stationary sawing machines. Due to a new carbide grade, a new PVD coating to obtain a very smooth surface finish and a new tooth geometry and body design for better chip evacuation, this Champion saw blade has an improved blade life of typically 50% and more compared to CX 3.

Applications
  • Cutting steel tubes with a tensile strength up to 850 N/mm2
  • Suggested cutting speed: 180 – 280 m/min.
  • Tooth load: 0.04 – 0.24 mm/tooth
  • Machines: stationary high output / heavy duty sawing machines like Rattunde, Soco, Sinico, Bewo, RSA, Adige, Tsune

More Less

Product category: Saw blades

TCT Champion TH

Champion TH is part of a new generation of saw blades – for extremely high output and very long blade life. This product has been developed to cut thin walled tubes with tensile strengths up to 1,800 N/mm2.

Advantages
The Champion TH saw blade can cope with the following 3 extreme cutting conditions:
  • Cutting tubes with tensile strengths up to 1,800 N/mm2
  • Cutting speeds up to 350 m/min
  • Very high feed rates
Applications
  • High performance cutting of thin and medium wall drawn tubes and high tensile tubes on high-end cut-off machines
  • Cutting speed: 200 – 350 m/min.
  • Feed: 0,04 – 0,2 mm/tooth.
  • Machines: Rattunde, Soco, Sinico, Bewo, RSA, Adige

More Less

Product category: Saw blades

TCT CX 1-M

The PVD coated, carbide tipped CX1-M saw blade has been developed for cutting solid carbon steel (carbon content < 0.60%) with a medium tensile strength between 500 and 900 N/mm2 at very high production rates.

Advantages
  • New saw body design
  • Specifically designed for cutting solid carbon steel with medium tensile strengths
  • High productivity
  • Best blade life performances when a wider range of materials needs to be cut
Applications
  • Solid carbon steel with a tensile strength between 500 and 900 N/mm 2 on high performance machines
  • Suggested cutting speed: 100 – 280 m/min.
  • Feed: 0,06 – 0,10 mm/tooth.
  • All known brands of stationary automatic sawing machines such as: Soco, Nishijimax, Tsune, Mega, Everising, Rattunde, Behringer etc.

More Less

Product category: Saw blades

TCT CX 1-H

Applying a new saw body design, new tooth geometries and a new type of PVD coating, the CX1H saw blade has specifically been designed for cutting high tensile carbon steel (> 900 N/mm2, carbon content ≥ 0.60%) at very high production rates. It is also very suitable for cutting ferritic, martensitic and duplex stainless steel bars with a diameter larger than 35 mm.

Advantages
  • New saw body design
  • New dedicated tooth geometries
  • New type of coating
  • Best blade life performances when cutting high tensile carbon steel
  • High productivity when cutting stainless steel
Applications
  • Hard solid carbon steel with a tensile strength higher than 900 N/mm2 and ferritic, martensitic and duplex stainless steel bars Ø >35 mm on high performance machines
  • Suggested cutting speed: 60 – 140 m/min.
  • Feed: 0,05 – 0,09 mm/tooth.
  • All known brands of stationary automatic sawing machines such as: Soco, Nishijimax, Tsune, Mega, Everising, Rattunde, Behringer etc.

More Less

Product category: Saw blades

TCT CX 3

The CX 3 saw blade has been developed for cutting tubes on high performance automatic sawing machines, at a higher maximum cutting speed than with HSS saw blades. It is most effective on sawing machines with accurate control of chip load and variable feed rate. Bigger tips are applied at pitches > 9mm for added stability.

Applications
  • Cutting steel tubes with a tensile strength between 600 – 1500 N/mm2
  • Suggested cutting speed: 180 – 280 m/min.
  • Feed: 0,04 – 0,16 mm/tooth.
  • Machines: Rattunde, Soco, Sinico, Bewo, RSA, Plantool, Adige, OMP

More Less

Product category: Saw blades

TCT CX 4

The high nickel content of austenitic stainless steel tubes makes them difficult to cut with HSS saw blades. With the dedicated tooth geometry of the carbide tipped and PVD coated CX 4 saw blade, perfect surface finish and burr-free tube ends will be achieved.

Applications
  • High performance cutting of stainless steel tube (austenitic, ferritic)
  • Suggested cutting speed: 80 – 140 m/min
  • Feed: 0,06 – 0,12 mm/tooth
  • Machines: Rattunde, Soco, Bewo, RSA, Sinico

More Less

Product category: Saw blades

TCT CX 5

The CX 5 saw blade has been specifically designed to cut thin walled tubes. Because of its light cutting properties it is also very well suited for use on a wide range of automatic cut-off machines.

Applications
  • Thin walled high hardness tube cutting on lighter machines
  • Cutting less stable, high hardness hollow sections on high performance machines
  • Suggested cutting speed: 160 – 280 m/min.
  • Tooth load:  0,025 – 0,12 mm/tooth
  • Machines: Kasto, Bewo, RSA, Adige, Soco, Sinico, Rattunde

More Less

Product category: Saw blades

TCT CX 6-S

CX6-S saw blades are carbide tipped and PVD coated for cutting stainless steel solids with a diameter ≤ 35 mm. High production rates and optimal surface finish can be achieved with our dedicated geometry.

Advantages
  • New saw body design
  • Best saw blade when cutting ferritic, martensitic and duplex stainless steel at smaller diameter ranges
  • Specifically developed for stainless steel solids with a diameter ≤ 35 mm
  • Dedicated tooth geometry
Applications
  • Austenitic, ferritic, martensitic and duplex stainless steel bars with a diameter ≤ 35 mm
  • Suggested cutting speed: 80 – 140 m/min.
  • Feed: 0,03 – 0,05 mm/tooth.
  • Soco, Tsune, Amada, Mega, Kasto, Kentai, Behringer, Exactcut, Everising

More Less

Product category: Saw blades

TCT CX 6-L

The CX6-L saw blade has specifically been designed for cutting austenitic stainless steel bars with a diameter larger than 35mm at very high production rates. With its dedicated geometry, very fast cutting and good surface finish can be achieved.

Advantages
  • New saw body design
  • Specifically developed for stainless steel solids with a diameter > 35 mm
  • Dedicated tooth geometry
  • Very high production rates
Applications
  • Austenitic stainless steel bars with a diameter > 35 mm
  • Suggested cutting speed: 80 – 120 m/min.
  • Feed: 0,06 – 0,12 mm/tooth.
  • Soco, Tsune, Amada, Mega, Kasto, Kentai, Behringer, Exactcut, Everising

More Less

Product category: Saw blades

TCT CX 7

CX7 is a Cermet tipped, PVD coated saw blade dedicated to cutting solid carbon steel (carbon content < 0.60%) with a low to medium tensile strength up to 750 N/mm2. The best blade performance is being achieved when cutting lower tensile strength materials. On many applications, a blade life of 50 m2 and more can be achieved.

Advantages
  • New saw body design
  • Specifically designed for cutting low to medium tensile carbon steel
  • Best blade performance when cutting lower tensile strength materials
Applications
  • Solid carbon steel with a tensile strength up to 750 N/mm2
  • Suggested cutting speed: 100 – 280 m/min
  • Feed: 0,06 – 0,10 mm/tooth.
  • Machines: Soco, Kasto, Nishijima, Tsune, Amada, Behringer, RSA, Rattunde, Sinico, Mega, Exactcut, Everising

More Less

Product category: Saw blades

HSS X-treme 2.0

X-treme 2.0 embodies the best features of both the Fusion and Power saw blades. Due to a stable, flat hub and improved conicity of the cutting area, X-treme 2.0 saw blades offer a stable and highly accurate solution when cutting high tensile steel tubes and profiles on a very high performance level.

Advantages
  • Stable flat hub for high stability and accuracy
  • Extremely narrow tolerances in blade thickness
  • Optimized surface finish
  • Low friction coefficient
  • Very high temperature resistance
  • Improved blade tensions
  • More regrinds per blade, therefore lower cost per cut
  • Narrow tolerances in side run-out
  • To be used with spray mist or emulsion coolant for maximal results
  • For relevant applications, a recoating program is available
 Applications
  • Cutting steel tubes and profiles with a tensile strength up to 1000 N/mm2
  • Suggested cutting speed: 120 – 260 m/min
  • Feed: 0.04 – 0.22 mm/tooth.
  • Machines: High quality automatic

More Less

Product category: Saw blades

HSS X-treme NX

A dedicated low friction, thin PVD coating with a very high temperature resistance, as well as a stable, flat hub and improved conicity of the cutting area enable the X-treme NX saw blade to cut stainless steel tubes and profiles.

Advantages
  • Thin PVD coating, specifically designed for cutting stainless steel
  • Extremely narrow tolerances in blade thickness
  • Optimized surface finish
  • Very low friction coefficient
  • Improved blade tensions
  • Narrow tolerances in side run-out
  • High temperature resistance
  • Stable flat hub for high stability
  • To be used with spray mist or emulsion coolant for maximal results
  • For relevant applications, a recoating program is available
 Applications
  • (Stainless) steel tubes, profiles and sticky materials
  • Suggested cutting speed:
  • Austenitic stainless steel (300 series) 30 – 50 m/min
  • Ferritic w/o Ti (409 & 412) 220 – 260 m/min
  • Ferritic with Ti (441) 60 – 120 m/min
  • Machines: High quality automatic

More Less

Product category: Saw blades

HSS Power 2.0

Power 2.0 saw blades provide an optimal combination of a rigid saw blade and a vibration-reducing thin kerf for cutting thin walled tubes and profiles on very demanding applications. A superior surface finish and low friction multilayer PVD coating ensure low vibration, less burr and reduced risk of tube-end deformation.

Advantages
  • Ideal for very thin walled tubes and profiles
  • Low friction, high hardness and high temperature resistant multilayer PVD coating
  • Very suitable for extremely demanding applications
  • Reduced cutting resistance
  • Low vibration
  • Less burr
  • Reduced risk of tube-end deformation
  • Wear resistant
  • To be used with spray mist or emulsion coolant for maximal results
  • For relevant applications, a recoating program is available
 Applications
  • Cutting thin walled steel tubes and profiles
  • Suggested cutting speed: 120 – 200 m/min.
  • Feed: 0.04 – 0.18 mm/tooth.
  • Machines: Automatic, semi-automatic and flying cut off applications

More Less

Product category: Saw blades

HSS Power NX

The Power NX saw blade has specifically been designed for cutting (very) thin walled (stainless) steel tubes and profiles. A special, temperature resistant, thin PVD coating, combined with a thinned cutting area, enables these blades to be used for extremely demanding applications, like fast cutting of thin walled products.

Advantages
  • Especially designed for cutting stainless steel
  • Thin PVD coating with a very low friction coefficient and high hardness
  • Very suitable for extremely demanding applications
  • Low vibration
  • Less burr
  • Reduced risk of tube-end deformation
  • Very high temperature resistance
  • To be used with spray mist or emulsion coolant for maximal results
  • For relevant applications, a recoating program is available
 Applications
  • Cutting thin walled (stainless) tubes and profiles, sticky materials
  • Suggested cutting speed:
  • Austenitic stainless steel (300 series) 30 – 50 m/min
  • Ferritic w/o Ti (409 & 412) 220 – 260 m/min
  • Ferritic with Ti (441) 60 – 120 m/min
  • Machines: Automatic, semi-automatic, flying cut off applications

More Less

Product category: Saw blades

HSS Fusion 2.0

Due to a special, wear resistant, multilayer PVD coating with a low friction coefficient, very high hardness and very high temperature resistance, Fusion 2.0 saw blades can be used for cutting medium to high tensile carbon steel on extremely demanding applications. Also very suitable for flying cut-off applications.

Advantages
  • High blade life
  • Increased uptime
  • Reduced side pick-up
  • Low friction coefficient
  • Wear resistant
  • Very high temperature resistance
  • Suitable for extremely high cutting speeds and feeds
  • To be used with spray mist or emulsion coolant for maximal results
  • For relevant applications, a recoating program is available
 Applications
  • Medium to high tensile carbon tubes
  • Suggested cutting speed: 120 – 200 m/min
  • Feed: 0.04 – 0.18 mm/tooth
  • Machines: Automatic, semi-automatic and flying cut off applications

More Less

Product category: Saw blades

HSS Fusion NX

Fusion NX saw blades have specifically been designed for stainless steel applications and sticky materials, but they are also suitable for cutting (thin walled) steel tubes and stainless steel flying cut-off applications.

Advantages
  • Ideal for (thin walled) stainless steel tubes and sticky materials
  • Dedicated thin PVD coating
  • Reduced side pick-up
  • Very low friction coefficient
  • Wear resistant
  • Very high hardness
  • Very high temperature resistance
  • Suitable for extremely high cutting speeds and feeds
  • To be used with spray mist or emulsion coolant for maximal results
  • For relevant applications, a recoating program is available
Applications
  • Ideal for cutting (stainless) steel tubes and sticky materials
  • Suggested cutting speed:
  • Steel 60 – 120 m/min
  • Austenitic stainless steel (300 series) 30 – 50 m/min
  • Ferritic w/o Ti (409 & 412) 220 – 260 m/min
  • Ferritic with Ti (441) 60 – 120 m/min
  • Machines: Automatic, semi-automatic and flying cut off applications

More Less

Product category: Saw blades

HSS Eclipse

Due to a sophisticated PVD coating for wear protection which achieves a very low friction coefficient, the Eclipse saw blade is a cost efficient solution for cutting structural and non-alloy tool steel thin walled tubes. When cutting tubes and profiles on manual and semi-automatic sawing machines, Eclipse allows a higher cutting speed than a steam treated saw blade. It can even be used for cutting thin walled tubes on automatic machines.

Eclipse is also very suitable for cutting stainless steel tubes and profiles.

Applications
  • All structural steel and non-alloy steel thin walled tubes
  • Tensile strength up to 600 N/mm2
  • Steel – Suggested cutting speed: 60 – 120 m/min
  • Austenitic stainless steel (300 series) – Suggested cutting speed: 30 – 50 m/min 
  • Ferritic w/o Ti (409 & 412) – Suggested cutting speed: 220 – 260 m/min
  • Ferritic with Ti (441) – Suggested cutting speed: 60 – 120 m/min
  • Feed: 0,03 – 0,09 mm/tooth
  • Machines: manual, semi-automatic, automatic, flying cut-off applications

More Less

Product category: Saw blades

HSS Solar

Due to the higher oxidation temperature, the TiN coated Solar saw blade allows cutting of materials with high tensile strengths.

Advantages
  • Increased blade life compared to steam treated blades
  • Higher cutting speed rates
Applications
  • All materials like tubes, profiles and solids with a tensile strength up to 750 N/mm2
  • Suggested cutting speed: 80 – 140 m/min
  • Feed: 0,04 – 0,09 mm/tooth
  • Machines: manual, semi-automatic, automatic

More Less

Product category: Saw blades

HSS Alpha

The Alpha saw blade has a blue Oxide surface layer for a longer blade life compared to the uncoated saw blade. It is mainly being used for cutting steel on manual and semi-automatic sawing machines.

Applications
  • All materials like tubes, profiles and solids
  • All structural steels and non-alloy tool steel with a tensile strength up to 700 N/mm2
  • Suggested cutting speed: 30 – 60 m/min
  • Machines: manual, semi-automatic

More Less

About us

Company details

Industrial saw blade manufacturer Kinkelder tailors sawing solutions to the demands of professional cutting specialists.

By means of our high technology circular saw blades, the latest developments in coating technology, metallurgy, precision grinding and technical support, we enable our customers to achieve their cutting objectives.

Kinkelder’s full commitment includes training, both within its own organisation and of its customers, as a route to greater production efficiency. By providing structured workshops, seminars and individual support we continuously raise our standards of quality and productivity.

More Less

Company data

Sales volume

10-49 Mio US $

Export content

> 75%

Number of employees

100-499

Foundation

1945

Area of business

Iron, steel and non-ferrous metal industry

Company information as a PDF file