Bewo Cutting Systems B.V.

Van Harenstraat 2, 5145 RJ Waalwijk
Netherlands
Telephone +31 13 4676915
info@bewo.nl

Hall map

Tube 2020 hall map (Hall 6): stand E21

Fairground map

Tube 2020 fairground map: Hall 6

Our range of products

Product categories

  • 02  Processing machinery for metallic tubes and pipes
  • 02.01  Machinery for mechanical processing
  • 02.01.02  Tube cutting machines
  • 02.01.02.01  Tube sawing machines

Our products

Product category: Tube sawing machines

Bewo CPO-315 (PK)

Versions
The Bewo CPO comes in two types: the Bewo CPO-315 and the Bewo CPO-315 PK with a pneumatic clamp. Both types are available in a low-revolution version (LT) for stainless steel and mild steel, and in a high-revolution version (HT) for mild steel and non-ferrous stock.

Bewo CPO-315 LT: speeds of 18.5 and 37 m/min.
Bewo CPO-315 HT: speeds of 37 and 74 m/min.

Low-burr saw cut
Both versions of the Bewo CPO-315 are equipped with a unique self-centring jaw system for clamping stock. The jaw system clamps the stock on both sides of the saw cut and ensures you a low-burr saw cut. Because the stock clamp is self-centring, all stock to be sawn is always placed centrally under the saw blade, whatever its size. Your saw therefore always has the ideal point of action. This reduces the wear on the saw blades considerably and you can easily mitre both right and left, if desired with a mitre block.

Long life
The Bewo CPO-315's long life is mainly determined by the robust saw motor with low-tolerance drive system. The entire construction is of a heavy-duty quality. The Bewo CPO-315 can also be equipped with a pneumatic clamp (Bewo CPO-315 PK). With this pneumatic clamp you only have to adjust the clamp once when working in series. For safety all Bewo CPO-315's are equipped with a 7-mm vice stroke. 

The Bewo CPO manually operated circular sawing machine has become world renowned for its premium quality and user-friendly operation. Over the years, thousands of machines have been dispatched to various customers in practically every industry. Bewo CPO manually operated circular sawing machines can be fitted with either a manually operated or pneumatic clamp. All machines come on a heavy column with a plug-in cooling pump. The machine has two speeds, a dual operation material clamp and angle adjustment. 

More Less

Product category: Tube sawing machines

SCF-90 Sigma

The user-friendly Sigma is unequalled in the efficient mass production of large volumes of tubes and profiles. Changing over to another batch takes only 12 minutes (for a complete Sigma cutting line with deburring machine, a length control system and stacking robot). 

The user-friendly control system analyses entered specifications and selects the most efficient settings, including advise for saw blade. The Sigma has a servo-controlled gripper feed without mechanical stop.

Furthermore the Sigma is very efficient with energy and is environmentally friendly. The Sigma consumes very little cutting oil and has a saw motor of 9 kW suitable for HSS and TCT saw blades.

Most important: finished products are of very high quality. During transport the Sigma lifts the tubes, so there is no contact with either base or clamp jaw, leaving practically no scratches or deformations.

More Less

Product category: Tube sawing machines

SCF-90 Single

The Single is the ideal solution for the fast production of smaller batches with different types of products. Thanks to its unique flexibility and extremely short changeover times, the Single makes it possible to dramatically reduce the production costs of smaller batches. The Single also offers the possibility of simultaneously cutting two tubes with diameters ranging from 10-45 mm which makes the processing of larger batches also efficient. The Single has a servo-controlled gripper feed without mechanical stop.

Changing over to another batch takes only 2 minutes due to the use of universal tools. Besides that, our changeover sets are attractively priced.

The user-friendly control system analyses entered specifications and selects the most efficient settings, including an advise for saw blade. 
Furthermore the Single is very efficient with energy and is environmentally friendly. The Single consumes very little cutting oil and has a saw motor of 9 kW, suitable for HSS and TCT cutting blades.

Most important: finished products are of very high quality. The Single leaves practically no scratches or deformations on the tube. Of course we can make many specific adaptations for you. 

More Less

About us

Company details

We are ready for an innovative future
We continue to invest in the further development of existing concepts and are always initiating new ones. As a one-stop supplier, we provide tailor-made solutions for each customer: we can supply your total cutting solution. We are able to incorporate various components and options according to each market requirement and to integrate cutting machines, deburring machines, length control systems, tube cleaning machines and stacking robots to entirely suit your production process.

For example, our team of experienced R&D engineers use the most advanced design systems available such as CAD/CAM, AutoCAD and SolidWorks. R&D is focussed on further developing of existing concepts and initiating new concepts.
..
Also we find our social responsibility important. We organise the production processes in environmentally friendly ways, use sustainable materials and we implement environmentally friendly technologies in developing our products. For instance we have developed applications in hydraulics, pneumatic systems and servo techniques which limit the consumption of energy and reduce the use of oil.

Besides that, Bewo Cuttting Systems B.V. is part of NIVORA Holding B.V. NIVORA Holding B.V. consists of several leading manufacturers of innovative metalworking machines that occupy a leading position in various market segments.

More Less