Manage stand orders
Select Option

SIKORA AG

Bruchweide 2, 28307 Bremen
Germany
Telephone +49 421 48900-0
Fax +49 421 48900-90
sales@sikora.net

Hall map

Tube 2020 hall map (Hall 6): stand G04

Fairground map

Tube 2020 fairground map: Hall 6

Contact

Holger Lieder

Sales Director

Phone
+49 421 48900 0

Email
sales@sikora.net

Our range of products

Product categories

  • 05  Testing technology, sensor technology and quality assurance for the tube and pipe industry
  • 05.02  Process testing and sensor technology
  • 05.02.02  Length and speed measurement

Length and speed measurement

  • 05  Testing technology, sensor technology and quality assurance for the tube and pipe industry
  • 05.03  Product testing
  • 05.03.02  Laser beam testing equipment

Laser beam testing equipment

  • 05  Testing technology, sensor technology and quality assurance for the tube and pipe industry
  • 05.03  Product testing
  • 05.03.04  Ultrasonic test equipment

Ultrasonic test equipment

  • 05  Testing technology, sensor technology and quality assurance for the tube and pipe industry
  • 05.03  Product testing
  • 05.03.05  X-ray inspection equipment

X-ray inspection equipment

  • 05  Testing technology, sensor technology and quality assurance for the tube and pipe industry
  • 05.03  Product testing
  • 05.03.07  Diameter measuring devices
  • 05  Testing technology, sensor technology and quality assurance for the tube and pipe industry
  • 05.03  Product testing
  • 05.03.09  Concentricity testing equipment

Concentricity testing equipment

  • 05  Testing technology, sensor technology and quality assurance for the tube and pipe industry
  • 05.03  Product testing
  • 05.03.10  Ovality testing equipment

Our products

Product category: Laser beam testing equipment, Concentricity testing equipment, Ovality testing equipment, Diameter measuring devices

LASER Series 2000

LASER Series 2000

The gauge heads of the LASER Series 2000 enable non-contact and non-destructive measurement of the diameter and the ovality of wire rods, bars and tubes during production. The measuring method is based on the use of laser light sources and CCD sensors in combination with powerful signal processors. The outer diameter of the metal tube is calculated by means of an intelligent diffraction analysis. Extremely short exposure times guarantee a high accuracy of the single value at all line speeds.

The LASER Series 2000 includes gauge heads for different product diameters from 0.05 to 500 mm. They are free of wearing parts, keep their precision during the entire operating time and no calibration or maintenance work is necessary. The measuring values are clearly displayed on the monitor of a processor system of the ECOCONTROL series.

Ultimately, it is high-quality laser technology with a unique non-contact and non-destructive measuring principle that inspires. For the measurement of the diameter the optimal system for quality assurance, process optimization and stability.

More Less

Product category: Diameter measuring devices

PLANOWAVE 6000 M

PLANOWAVE 6000 M

PLANOWAVE 6000 M is a non-contact measuring system that is used for non-destructive thickness measurement of strips and plates. The system is based on millimeter wave and radar technology. It offers a precise thickness measurement independent of material, temperature and surface of the product. A calibration on the material is not needed.

The PLANOWAVE 6000 M is either integrated directly into the production line or used for final inspection. The measurement of the product is accomplished by using millimeter waves, according to the FMCW runtime method. An optionally traversing set of transceivers above and below the strip or plate continuously sends and receives frequency modulated millimeter waves. From the runtime difference, the thickness of the product is precisely determined.

More Less

Product category: Diameter measuring devices, Concentricity testing equipment, Ovality testing equipment

RADAR SCAN 6000

RADARSCAN 6000

SIKORA’s RADAR SCAN 6000 is based on progressive, high resolution radar technology and represents an innovative alternative to the optical triangulation technology. The RADAR SCAN 6000 measures online and contactless, simultaneously from several directions, the diameter and ovality of metal pipes. It completely records to micron accuracy measuring values over 360° of the circumference of the pipe. In addition, fast rotating metal pipes can be precisely measured. The radar measuring system requires no time-consuming calibration, is insensitive to dust, heat and steam and continuously delivers precise measuring values. Due to the narrow design, the RADAR SCAN 6000 can easily be integrated into the production process. The technology is suitable for blank, rough as well as cold or hot surfaces.

More Less

Product category: X-ray inspection equipment, Diameter measuring devices, Concentricity testing equipment, Ovality testing equipment

X-RAY 6000 PRO

X-RAY 6000 PRO

For quality control at the production of light alloy tubes, the X-RAY 6000 PRO continuously provides data for inner and outer diameter, wall thickness, ovality and eccentricity to ensure that the required product specifications are met. Therefore, the system provides the basis for optimization and repeatability of processes.

The X-RAY 6000 PRO measures wall thickness, eccentricity, inner and outer diameter and ovality of up to three different material layers. As standard, the system includes the processor-based display and control device ECOCONTROL 6000 with a vertically arranged 22“ TFT monitor. The ECOCONTROL 6000 is conveniently and intuitively operated via touch screen. All relevant measuring values are numerically as well as graphically and as trend and statistical data shown at a glance. A line presentation with pictograms of the connected devices provides a clear overview.

More Less

About us

Company details

Technology to Perfection - a promise

Technology of the future – that is SIKORA’s trademark. Started with measuring devices for the industrial production of wires and cables, we have been developing ourselves and our technologies for more than 40 years. As a leading company for measuring and control technology as well as for inspection, analysis and sorting systems and as a Hidden Champion of the German medium-sized companies, we set standards for quality assurance, process optimization and cost savings in many industries with our innovative solutions.

More than 250 employees of the family business SIKORA with headquarters in Bremen/Germany, our local representatives and international offices ensure quality assurance and efficiency – with customized customer service. Listening to the market and with pioneer spirit, great perfection and enthusiasm, our experts research and develop revolutionary innovations for most economical production processes.

Our success can be measured – especially by the success of our customers.

More Less

Company data

Sales volume

50-99 Mio US $

Export content

> 75%

Number of employees

100-499

Foundation

1973

Area of business

Measuring and control technology

Company information as a PDF file