Manage stand orders
Select Option

Kanefusa Europe B.V.

De Witbogt 12, 5652 AG Eindhoven
Netherlands

Hall map

Tube 2020 hall map (Hall 6): stand H22

Fairground map

Tube 2020 fairground map: Hall 6

Our range of products

Product categories

  • 03  Tools, auxiliary materials and agents for the manufacturing and processing of metallic tubes and pipes
  • 03.01  Tools
  • 03.01.05  Saw blades

Our products

Product category: Saw blades

Tube Max Scarf

For Scarf Flying Cut-off Saw Blade
• Optimized tooth shape, tip grade and advanced coating achieve longer service lifetime.
• The embedded TCT and optimized gullet shape achieve longer service lifetime while cutting welding bead smoothly.
Application
Cuts thin-walled tubes
Machines
Straight Sawing machine
Edge Material
Coated Tungsten Carbide

More Less

Product category: Saw blades

Tube Max Orbital

For Orbital Flying Cut-off Saw Blade
• Much less edge wear and better heat resistance due to the improved edge configuration, edge quality and coating.
• Longer cutting life even on higher tensile material like X80 and with high rim speed of more than 600m/min.
• Thanks to the above improvements, stable performance, even with faster sawing and line speed are now possible.
Application
Cuts ferrous tubes
Machines
Orbital Sawing machine
Edge Material
Coated Tungsten Carbide

More Less

Product category: Saw blades

Sash Pro

Heavy Duty Saw Blade for Non-Ferrous Materials
• Runs very quiet due to vibration damping slits LS-P in the plate.
Application
Cutting of extruded profiles, thin sheets and bars
Machines
Cut-off machines, beam saws, miter saws
Edge Material
HW

More Less

Product category: Saw blades

Ferro Max ST-5P

Cold Saw Blade (Single Use) for Cutting Solids, Tubes & Pipes
• Thanks to the high chipping resistant cermet tooth edge, it achieves more stable sawing performance in the harsh condition which triggers damages to tooth edges.
Application
Cuts solids and tubes
Machines
Cold saw machine Vc = 100 m/min - 200 m/min f z = 0.03 mm - 0.06 mm
Edge Material
Cermet

More Less

Product category: Saw blades

Ferro Max SUS

Cold Saw Blade (Single Use) for Cutting Stainless Steel Solids
• Due to the special SUS-coating, the lifetime of the Ferro Max SUS can be doubled compared to TA-4SUS when cutting SUS 316 or SUS 304.
Application
Cuts solids
Machines
Cold saw machine Vc = 50 m/min - 70 m/min f z = 0.04 mm - 0.06 mm
Edge Material
Coated Tungsten Carbide

More Less

Product category: Saw blades

Ferro Max SUS Tube

Cold Saw Blade (Single Use) for Cutting Stainless Steel Thin-walled Tubes
• Achieve 10 times longer cutting life compared with Ferro Max Tube in difficult stainless steel tube sawing with newly developed special tooth shape, carbide edge and coating.
Application
Cuts thin walled tubes
Machines
Cold saw machine vc = 50 m/min - 100 m/min f z = 0.03 mm - 0.05 mm
Edge Material
Coated Tungsten Carbide

More Less

Product category: Saw blades

Ferro Max Super Tube

Cold Saw Blade (Single Use) for Cutting Thin-walled Tubes on High Speed
• Ferro Max Super Tube is suitable to cut high tensile strength tube (>800N/mm2) with cutting speed of over 200m/min.
Application
Cuts thin walled tubes
Machines
Cold saw machine Vc = 200 m/min - 300 m/min f z = 0.03 mm - 0.05 mm
Edge Material
Coated Tungsten Carbide

More Less

Product category: Saw blades

Ferro Max Tube

Cold Saw Blade (Single Use) for Cutting Thin-walled Tubes without Deformation
• To avoid the swarf adhesion into the gullet, the number of teeth in the cut should be less than 3.
Application
Cuts thin-walled tubes
Machines
Cold saw machine Vc = 100 m/min - 200 m/min f z = 0.03 mm - 0.05 mm
Edge Material
Cermet

More Less

Product category: Saw blades

Ferro Max Speed

Cold Saw Blade (Single Use) for Cutting Alloy Steel on Higher Speed
• Ferro Max Speed saw blades can be ran with cutting speeds of over 200 m/min, which greatly increase the productivity of a machine.
Application
Cuts solids and tubes
Machines
Cold saw machine Vc = 200 m/min - 300 m/min f z = 0.05 mm - 0.08 mm
Edge Material
Coated Tungsten Carbide

More Less

Product category: Saw blades

Ferro Max Speed LC

Cold Saw Blade (Single Use) for Cutting Low Carbon Alloy Steel on Higher Speed
• Ferro Max Speed saw blades can be ran with cutting speeds of over 200 m/min, which greatly increase the productivity of a machine.
Application
Cuts solids and tubes
Machines
Cold saw machine Vc = 200 m/min - 300 m/min f z = 0.05 mm - 0.08 mm
Edge Material
Coated Tungsten Carbide

More Less

Product category: Saw blades

Ferro Max ST-5

Cold Saw Blade (Single Use) for Cutting Carbon Steel Solids (C: ≦0.45 %)
• Thanks to the higher wear and adhesion resistant tooth tips, it achieves more stable and longer sawing performance for billets of carbon content less than 0.45% and other alloy steels.
Application
Cuts solids
Machines
Cold saw machine Vc = 70 m/min - 120 m/min f z = 0.05 mm - 0.07 mm
Edge Material
Cermet

More Less

About us

Company details

Since being established in 1948, Kanefusa Corporation has proved to be one of the largest manufacturers of high-quality tools for various industries. It has accumulated the vast experience which allowed it to develop over 440 patents and utility models. Nowadays Kanefusa offers a complete range of cutting tools, including but not limited to circular saw blades for metal cutting which are considerably developed to correspond to various cutting conditions and processing requirements each customer has for his own production.

More Less

Company information as a PDF file