The RH 120 is a simple, economical and robust equipment, mainly intended for the production of large parts. It uses the principle of rotating head around the wire; the rotation of the latter being difficult to envisage beyond 10 mm in diameter.
The machine is fitted with a feeding assistant allowing the easy introduction of the wire in the straightener, up to the bending head. The operation is done without effort or risk.
It is equipped with an innovative design where three motors only generate 4 independent movements:
Rotation of the arm supporting the bending head
Rotation of the bending head
All movements are 100% electric.
No cables or motors elements are contained in the rotary head. Thereby :
There is no rotary manifold.
The arm supporting the head is not limited ; it can rotate more than 360° per cycle.
At the end of the cycle, the latter does not have to return to its starting point; which increases productivity.
Product category: Torsion / leg spring coiling machines, Tension spring coiling machines
MAX CR 23
0.3 to 2.3 mm
The CR 23 is a bestseller. Machine for springs of all shapes and wire form parts.
* It can be fitted with a left/right sliding system for the coiling finger, which allows the operator to control and adjust the pre-tension for various coiling processes. * The machine can operate several spinners, which are owered by one or two motors. * This last configuration allows the operator to generate more than one coiling radius with the same tool set. * The machine is equipped with automatic OD control and correction, and, optionally, with a system to stop precisely the spinners upon touching the wire bent.
Product category: Tension spring coiling machines, Torsion / leg spring coiling machines
Spring Coiler Carlson II
The spring machine, known worldwide as the “Carlson” for years, rapidly coils compression, torsion and extension springs with precision.
Use: A turn of the handle makes 1 or 3 coils (left or right). The number of available coils, the pitch and the number of end coils are easily defined with a ruler and rack stops. The coil diameter is determined by the coilling mandrel.
Delivered with: 24 mandrels (de 1,6 à 13 mm), wire-guides, clamps, services wrenches
Baudrand New Tech will hold a 150m² stand, 20% more spacious than that of the previous 2018 edition. Baudrand New Tech, offers more than 25 years of experience in designing, manufacturing, using, retrofitting, adapting, reconstructing, development of specific tools and marketing of wire and strip working machines. Its offices, warehouses and permanent showroom are in Lyon (France) and Barcelona (Spain).
Special machines for automatic production of complex products
Second hand machines About 60 machines available in our workshop and showroom on Lyon (FR) and Barcelona (ES).
Design, production, assembly and adjustment of tooling for multi-slides bending machines - Bihler and Finzer type, and other mechanical machinery. Our know-how is comprises over more than 300 tools for both wire and strip.