ELMAKSAN MAKINA SAN. VE DIS TIC. LTD. STI

Büyükbakkalköy Mah. Elmaksan Sokak No. 12 Maltepe, 34858 Istanbul
Turkey
Telephone +90 216 5613300
Fax +90 216 3117341
sales@elmaksan.net

Hall map

Tube 2020 hall map (Hall 6): stand G11

Fairground map

Tube 2020 fairground map: Hall 6

Our range of products

Product categories

  • 02  Processing machinery for metallic tubes and pipes
  • 02.01  Machinery for mechanical processing
  • 02.01.02  Tube cutting machines
  • 02.01.02.02  High-speed flying shears for tubes
  • 02  Processing machinery for metallic tubes and pipes
  • 02.11  Handling systems, feeding systems and logistics for the tube and pipe industry
  • 02.11.02  Accumulators
  • 02.11.02.01  Horizontal strip accumulators
  • 02  Processing machinery for metallic tubes and pipes
  • 02.13  Profile Machinery
  • 02.13.05  Profile end forming machines
  • 09  Special area pipeline and OCTG technology (OCTG – Oil Country Tubular Goods)
  • 09.01  Construction of OCTG plants and pipelines
  • 09.01.01  Machinery and equipment

Our products

Product category: High-speed flying shears for tubes, Horizontal strip accumulators, Profile end forming machines, Machinery and equipment

SLITTING LINES

ELMAKSAN has nearly 175 standard models of slitting lines with different versions which are capable of processing strip with thickness from 0.3 mm to 12 mm, in width of up to 2.000 mm and coil weights up to 30 tons.

Both ferrous and non-ferrous metals such as stainless steel, aluminum, brass copper, chromium and many different kinds of special alloys can be slitted precisely with the best cutting tolerances.

We work with well known and experienced suppliers for hydraulic, pneumatic and electronic equipments with highest and best quality, which can be supplied and found worldwide.

Fully automatic slitting heads with four spare arbours give the opportunity to change the knives and spacers in shortest possible time such as only 1min. with servo control.

Using the latest technologies and automation controls, ELMAKSAN can supply high number of cuts in different thicknesses with the possible highest speeds according to different tensile and yield strength of materials.

We aim to maximize our customers’ productivity and help them to reach the highest standards of product quality with economical solutions;

Cost effective designs with latest technologies
Never strip marking
Guaranteed product performance
ELMAKSAN is one of the most experienced and best manufacturers of the slitting lines with the easiest and practical but most technological design with a fast production worldwide.

More Less

Product category: High-speed flying shears for tubes, Horizontal strip accumulators, Profile end forming machines, Machinery and equipment

Cut To Length Lines

ELMAKSAN manufactures specially designed Cut To Length Lines which offer practical solutions to meet today’s most demanding requirements which goal is to minimize operator faults. The lines can be fully automatically controlled and have timesaving features which improve efficiency, reduce downtime and increase production.

There are almost 200 standard models of Cut to Length Lines, covering range from 0.3 mm to 15 mm with different width up to 2000 mm and with coil weight of 30 tons. Three different types of shears

and cutting systems are used in our lines, such as:

Guillotine Shear,
Rotary Shear,
Flying Shear,
Fastronic Shear
For especially thin gauges up to 3 mm thicknesses rotary shears are chosen with fast and continuous cutting. Flying shears are used for thick gauges especially more than 5 mm. Different automatic packing systems are also adopted according to the said above different cutting systems with the best cutting, diagonal and length tolerances. We can offer to you high precision levelers with which best surface flatness can be reached. According to the different physical properties of the sheets and different kinds of materials, different types of levelers (such as 6 Hi and 4 Hi) are adopted to the line.

Due to the number, diameter, support and control of the rolls in a leveler, you can achieve a perfect surface flatness which can not be reached with ordinary straightener or flattener.

Additional accessories such as, paper decoiling and recoiling and plastic film coating units can also be added to the lines for especially stainless and pre painted steel usage.

ELMAKSAN has developed its production range with multi-blanking lines to cover the last years demands of high-tech service centers.

We will provide full project management including foundation construction, staff training, start up of the line and on-going operation assistance.

We offer full project management including foundation construction, site selection, staff training, first run of the line and on-going operation assistance.

More Less

Product category: High-speed flying shears for tubes, Horizontal strip accumulators, Profile end forming machines, Machinery and equipment

TUBE AND PIPE LINES

ELMAKSAN offers almost 36 standard models, covering range from 1/8″ (10mm) up to 10″ (273 mm) diameter and wall thickness from 0,5 mm up to 12,7 mm. Complete lines are designed so as to achieve the fast speed with the best quality of round tubes as well as profiles by using cold cut saws for burr free production.

All break down, finpass and idler stands have been designed to be removed and fixed back in the easiest way so that the operators can save time for more effective production with the most practical use. Besides, the said stands have the full strength to bear the maximum force with higher thicknesses. Even for more time save, quick change cassette systems help you to change roll tooling quickly, easily and safely.

Usually we prefer to use horizontal accumulators for tube mills. Such types are used either for very light narrow gauge strips or for very wide strips. The speed of the horizontal accumulators can be adjusted according to the speed of the complete line by AC motors and also are generally preferred not only because of easy usage and maintenance, but economic advantages.

The tubes and pipe of carbon and galvanized steel and even stainless steel can be produced with different type of welding machines and cut by cold saws with the best length and cutting tolerances.

Burr free cutting with cold saw with the high speeds is also guaranteed by ELMAKSAN while it can never be reached by hot saws.

Best automation systems such as motion control and electronic components are used in the complete lines and the spare parts can be easily found in every region of the world.

We can prepare and arrange customized solution into your existing lines. Our aim is to provide our customers with the most advanced, cost-effective tube and profile mills.

We will provide full project management including foundation construction, staff training, start up of the line and on-going operation assistance.

More Less

About us

Company details

Having a large experience over 35 years , ELMAKSAN Machinery Industry , is a leading company in Turkey for the production of pipe & profile lines, slitting lines and cut-to-length lines, other extra equipment and spare parts.

Elmaksan Machinery’s production facilities cover over 44.000 m2, one in Istanbul with 10.000 m2 total and 5.000 m2 closed areas; and another located in Kocaeli Free Zone with closed area of 22.000 m2 out of total 14.000 m2.

More than 85% of the total volume of production is being exported abroad and up to now over 400 lines have been sold to 40 different countries in 4 different continents.

More Less