Fenn, LLC

80 Clark Drive Unit 5D, 06023 East Berlin, CT
USA
Telephone +1 860 259-6600
Fax +1 860 259-6601
sales@fenn-torin.com

Hall map

wire 2020 hall map (Hall 13): stand A85-04

Fairground map

wire 2020 fairground map: Hall 13

Contact

Ryan Cutter

Phone
860.259.6580

Email
ryan.cutter@fenn-torin.com

Craig Watterson

Phone
860.259.6560

Email
craig.watterson@fenn-torin.com

Thomas Mushroe

Phone
860.259.6561

Email
thomas.mushroe@fenn-torin.com

Namdeo Ranjane

Kevin Campion

Phone
860.578.6187

Email
kevin.campion@fenn-torin.com

Our range of products

Product categories

  • 01  Machinery for the manufacture of rods, wires and strips
  • 01.02  Rolling
  • 01.02.01  Hot rolling lines

Hot rolling lines

  • 01  Machinery for the manufacture of rods, wires and strips
  • 01.02  Rolling
  • 01.02.02  Cold rolling lines

Cold rolling lines

  • 02  Machinery for the processing of rods, wires and strips
  • 02.02  Machinery for the processing of rods
  • 02.02.04  Rod drawing machines
  • 02  Machinery for the processing of rods, wires and strips
  • 02.02  Machinery for the processing of rods
  • 02.02.08  Pointing machines for rods

Pointing machines for rods

  • 02  Machinery for the processing of rods, wires and strips
  • 02.03  Machinery for the processing of wires and strips
  • 02.03.05  Wire reduction rolling mills
  • 02  Machinery for the processing of rods, wires and strips
  • 02.03  Machinery for the processing of wires and strips
  • 02.03.06  Strip rolling mills

Strip rolling mills

  • 02  Machinery for the processing of rods, wires and strips
  • 02.03  Machinery for the processing of wires and strips
  • 02.03.09  Single-wire drawing machines (intermediate, fine and superfine wire drawing)

Single-wire drawing machines (intermediate, fine and superfine wire drawing)

  • 02  Machinery for the processing of rods, wires and strips
  • 02.03  Machinery for the processing of wires and strips
  • 02.03.15  Other wire manufacturing machines
  • 02  Machinery for the processing of rods, wires and strips
  • 02.10  Machinery for the manufacture of springs, chains, and punched and bent parts
  • 02.10.01  Tension spring coiling machines

Tension spring coiling machines

  • 02  Machinery for the processing of rods, wires and strips
  • 02.10  Machinery for the manufacture of springs, chains, and punched and bent parts
  • 02.10.02  Torsion / leg spring coiling machines

Torsion / leg spring coiling machines

  • 02  Machinery for the processing of rods, wires and strips
  • 02.10  Machinery for the manufacture of springs, chains, and punched and bent parts
  • 02.10.03  Compression spring coiling machines

Compression spring coiling machines

  • 02  Machinery for the processing of rods, wires and strips
  • 02.11  Machinery for the manufacture of fasteners (bulk metal forming)
  • 02.11.06  Profile rolling machines

Our products

Product category: Pointing machines for rods, Other wire manufacturing machines

FENN Swagers

FENN's NF-2 automated swaging solution is a tabletop system. The FENN NF-2 rotary swager is specialized for small solid rod and tubing, commonly used in the medical, aerospace, and energy industries. Some examples are hypodermic tubing, catheters, small insulated cables, and pointing of titanium wire. The show system will demonstrate swaging capabilities of pointing 1/8” (3.175 mm) stainless steel tubing.

Worldwide, FENN metal forming machinery has set the standard for precision, production, reliability and versatility. FENN Swagers are used as an efficient way to point, reduce & form rod, wire or tube. 2-die and 4-die configurations are available.

FENN offers Swager types including:

  • Stationary Swagers
  • Rotary Swagers
  • Hydroformers
  • LongDie Swagers

More Less

Product category: Hot rolling lines, Cold rolling lines, Rod drawing machines, Wire reduction rolling mills, Strip rolling mills

FENN Rolling Mills

FENN engineers and manufactures a complete line of precision Rolling Mills machines. FENN offers a wide range of standard and custom Rolling Mills for a variety of applications including heavy ingot breakdown, laboratory research, coil to coil rolling and precision strip. FENN Rolling Mills can be configured for both hot and cold rolling applications.
Some of the many different types of rolling mills that FENN offers are:
  • Two-High: Generally, a 2-HI mill is used for hot or cold breakdown and finishing of bar, sheet or strip. A wide range of sizes with separating force capacities from 10,000 lbs. (4.53 MT) to over 3,000,000 lbs. (1360 MT) are available.
  • Three-High: A 3-HI mill is an economic milling solution for the breakdown of rod and ingot.
  • Four-High: A 4-HI mill may be used for finish rolling of thin gauge stock. 6-HI roll inserts are also available for narrow width ribbon and foil products.
  • Combination: A combination rolling mill is a versatile “two-in-one” type mill that permits both 2-HI and 4-HI rolling operations.
  • Tandem: These mills are use for multiple pass rolling, combining two or more mill stands. Tandem mills are often used with turks heads, edgers, dancers, inter-stand tensiometers, payoff and take-up equipment. 
  • Horizontal: This type of a mill is designed for the field of powered metallurgy, plastics and battery industries.
  • Laboratory: FENN designs custom, specialized mills engineered to meet the critical requirements of metallurgists and scientists in research and university fields, as well as pilot line development. 
  • Mill with Winders: A mill set up with winders on either side allows for the rolling of continuous coil for sheet or thin foil.

More Less

Product category: Compression spring coiling machines, Tension spring coiling machines, Torsion / leg spring coiling machines

FENN-Torin Spring Coilers

FENN is pleased to offer the Torin line of high speed, versatile spring coiler machines, available in both single or dual point configurations.

More Less

Product category: Wire reduction rolling mills, Single-wire drawing machines (intermediate, fine and superfine wire drawing), Profile rolling machines

FENN Turks Heads

FENN Turks Head utilizes two pairs of rolls, one pair is arranged horizontally, while the other is arranged vertically. The material is formed and shaped through the Turks Head by either a pulling device such as a capstan, or by driven rolls in power-driven models. Turks Heads are used for the direct formation of round material to squares, rectangles and special shapes.

FENN offers:

  • Power-Driven Models
  • Pull-Through Models
  • Mill Types

More Less

Product category: Wire reduction rolling mills, Other wire manufacturing machines, Profile rolling machines

FENN Wire Flattening & Shaping Equipment

FENN Wire Flattening & Shaping Equipment can be designed for any application from .002" to 2.00" (.05mm to 50mm) inlet diameter. FENN wire shaping lines are not limited to the rolling of natural edged flat wire: square, rectangle, trapezoid, oval, half round, and many other shaped wire can be rolled with the proper selection of equipment. Ferrous, non-ferrous, alloy, exotic metals and engineered metals.

More Less

Product category: Rod drawing machines

FENN Drawbenches

FENN designs and manufactures a full line of wire, rod and tube processing drawbench machines. FENN can design drawbench systems up to 230 ft. long (70.1 m.) with 200,000 lbs. pull (90,718.474 kg.)

FENN Drawbench Types:
  • Chain
  • Hydraulic
  • Ball Screw
  • Semi Automated
  • Fully Automated
  • Pneumatic

More Less

About us

Company details

FENN has been a leader in providing quality metal forming machinery for over 100 years. Our experts take the time to design and build the right metal forming machine to fit your specifications and fulfill your production requirements. Whether you’ve been in business as long as us, or you’re just getting started, FENN has the expertise to create precise metal forming equipment for a wide variety of industries and applications. With specialization in both standard and specialty metals, see how FENN’s product and service offerings can help increase productivity for your business.

FENN manufactures metal forming machinery such as:

  • Rolling Mills
  • Lab Rolling Mills
  • Swagers
  • Wire Flattening & Shaping Equipment
  • Turks Heads
  • Torin Spring Coilers
  • Drawbenches
  • Customized Metal Forming Machinery 

More Less

Company data

Foundation

1900