Automatic tester AFP-20 for test of compression springs with servo drive. Two precision ballscrews (diameter 63 mm) and two columns (diameter 60 mm) guarantee an precise and durably movement of the upper testplate, test lenght 1.300 mm with a resolution of 0,01 mm, testplate diameter 400 mm with ring marks to place the spring in center. The upper testplate has the possibility to check springs on a guide mandrel with max. diameter of 120 mm or can be used without a hole. The lower testplate rests on 4 loadcells to get a very stable and repeatable result. The speed of the upper testplate is adjustable and performs tests of long springs with high speed. A loading table for a spring or guide mandrel is placed in front of the lower testplate so that the spring or the mandrel with spring can easily be placed on the testplate. Above the table optional a crane can be fitted to place the bigger springs on the loading table or mandrel. The mandrels are fixed on their own baseplate. They are placed on the lower testplate and can be pulled out to load the spring.
Part/No Part Detection Completeness Check of Construction units/- groups Check for correct feeding position Check for Tangled Springs Examine for sort purity
Stand-Alone Solution (PC is only required for configuration of inspections) 20 Inspektios / different parts possible Max. Dimension of part to be checked 25 x 80 mm max. No. of pieces: depends on parts to be checked and No. of characteristics max. 120 / min
On the swift AGH-7.5 the wire can be placed horizontal on rings or drums. The swift is designed for continuous wirefeed as well as for intermittant wirefeed. Because of the electronic controlled motor with tensioncontrol the swift guarantees low and to the wirediameter adaptable tensionforces. Beside this there are no additional radialforces on the wirefeed of the coiler. With these advantages you can reach a high accuracy in wirefeed which improves the quality especially on a critical production. Higher production speed of springs can be reached because of the high speed of the swift. The swift has safety barrier connectors and hand-operate device.
The company was founded in 1979 by Klaus Böhm, and initially specialised in the manufacture of electronic measuring instruments for the spring manufacturing industry.
Sustained growth enabled the company to expand its product portfolio over a short period. It now manufactures spring load testers, automatic measuring systems, springcoilers, tempering furnaces, decoilers, spring-end grinding machines, automatic packaging machines, conveyor technology, automation and feeding solutions, spring production lines and special facilities.
Most of its customers are in Germany, but the company also delivers worldwide.