Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
Alok Ingots (Mumbai) Pvt. Ltd.
119, Dady Sheth Agyari Lane, Office # 6, 1st Floor, Kalbadevi,
400 002
Mumbai
India
India
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Location
Hall map
Fairground map
Contact
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 03 Tools and auxiliary materials and agents for the manufacture of drawn wire and the further processing of wire products
- 03.01 Tools for wire production
- 03.01.04 Tools for the manufacture of cables, fibre optics and wire ropes
- 03.01.04.09 Tools for power transmission purposes (cones, rings, guide and bearing pulleys)
- 03.01.04.09.02 Stainless steel
Stainless steel
- 04 Wire and wire products
- 04.01 Wire and bar material
- 04.01.01 Wire, related to its shape and dimension
- 04.01.01.01 Wire rod
- 04 Wire and wire products
- 04.01 Wire and bar material
- 04.01.01 Wire, related to its shape and dimension
- 04.01.01.03 Round / rounded wire
Round / rounded wire
- 04 Wire and wire products
- 04.01 Wire and bar material
- 04.01.05 Bar material
- 04.01.05.01 Iron, steel and special steel bars
- 04.01.05.01.03 Bright steel
Bright steel
- PUMP SHAFT QUALITY BRIGHT BARS (PSQ) - STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- BRIGHT BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- FLAT BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- OCTAGON BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- HEXAGON BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- 04 Wire and wire products
- 04.01 Wire and bar material
- 04.01.05 Bar material
- 04.01.05.01 Iron, steel and special steel bars
- 04.01.05.01.04 Hardening and tempering steel
Hardening and tempering steel
- WIRE ROD: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- CONTINUOUS CAST BILLETS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- ROUND BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- ROUND CORNERED SQUARES (RCS) / ROLLED BILLETS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- PUMP SHAFT QUALITY BRIGHT BARS (PSQ) - STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- BRIGHT BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- SQUARE BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- FLAT BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- OCTAGON BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- HEXAGON BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- 04 Wire and wire products
- 04.01 Wire and bar material
- 04.01.05 Bar material
- 04.01.05.01 Iron, steel and special steel bars
- 04.01.05.01.05 Tool steel
Tool steel
- WIRE ROD: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- CONTINUOUS CAST BILLETS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- ROUND BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- ROUND CORNERED SQUARES (RCS) / ROLLED BILLETS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- PUMP SHAFT QUALITY BRIGHT BARS (PSQ) - STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- BRIGHT BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- SQUARE BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- FLAT BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- OCTAGON BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- HEXAGON BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- 04 Wire and wire products
- 04.01 Wire and bar material
- 04.01.05 Bar material
- 04.01.05.01 Iron, steel and special steel bars
- 04.01.05.01.09 Stainless steel
Stainless steel
- WIRE ROD: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- CONTINUOUS CAST BILLETS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- ROUND BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- ROUND CORNERED SQUARES (RCS) / ROLLED BILLETS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- PUMP SHAFT QUALITY BRIGHT BARS (PSQ) - STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- BRIGHT BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- SQUARE BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- FLAT BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- OCTAGON BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- HEXAGON BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
- 04 Wire and wire products
- 04.06 Fasteners
- 04.06.02 Further fasteners
- 04.06.02.01 Threaded rods / thread rods
Threaded rods / thread rods
Our products
Product category: Wire rod, Hardening and tempering steel, Tool steel, Stainless steel
WIRE ROD: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
WIRE ROD : STAINLESS STEEL | ALLOY STEEL | TOOL , CREEP & SPECIALITY STEELS.
Supply Condition : Hot Rolled Annealed & Pickled (HRAP)
Sizes : 5.5mm to 26mm
Supply Condition : Hot Rolled Annealed & Pickled (HRAP)
Sizes : 5.5mm to 26mm
Product category: Tool steel, Stainless steel, Hardening and tempering steel
CONTINUOUS CAST BILLETS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
CONTINUOUS CAST BILLETS : STAINLESS STEEL | ALLOY STEEL | TOOL , CREEP & SPECIALITY STEELS.
Supply Condition : As Cast
Sizes : 100 X 100MM , 110 X 110MM , 125 X 125MM , 140 X 140MM , 160 X 160MM , 200 X 200MM , 200 X 250MM
Length : Up to 6.5Mtrs
Supply Condition : As Cast
Sizes : 100 X 100MM , 110 X 110MM , 125 X 125MM , 140 X 140MM , 160 X 160MM , 200 X 200MM , 200 X 250MM
Length : Up to 6.5Mtrs
Product category: Tool steel, Stainless steel, Hardening and tempering steel
ROUND BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
ROUND BAR : STAINLESS STEEL | ALLOY STEEL | TOOL , CREEP & SPECIALITY STEELS.
Supply Conditon : Hot Rolled | As Rolled
Size : 15mm to 160mm
Length : Up To 7.5 Mtrs
Supply Conditon : Hot Rolled | As Rolled
Size : 15mm to 160mm
Length : Up To 7.5 Mtrs
Product category: Tool steel, Stainless steel, Hardening and tempering steel
ROUND CORNERED SQUARES (RCS) / ROLLED BILLETS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
ROUND CORNERED SQUARES (RCS) / ROLLED BILLETS : STAINLESS STEEL | ALLOY STEEL | TOOL , CREEP & SPECIALITY STEELS.
Supply Condition : Hot Rolled
Sizes : 50mm to 125mm
Length : Up To 6.2 Mtrs
Product category: Bright steel, Hardening and tempering steel, Tool steel, Stainless steel
PUMP SHAFT QUALITY BRIGHT BARS (PSQ) - STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
PUMP SHAFT QUALITY BRIGHT BARS (PSQ) - STAINLESS STEEL | ALLOY STEEL | TOOL , CREEP & SPECIALITY STEELS.
Supply Condition : Peeled , Ground & Polished
Sizes : 1/4" to 1 1/2" , 1-9/16" Thru 4"
6mm to 100mm
Tolerance :
+0.000/-0.001. + +0.000/-0.0015"
Available in f7 , f8 , h7 , h8 , h9
Length : Up to 7 Mtrs
Supply Condition : Peeled , Ground & Polished
Sizes : 1/4" to 1 1/2" , 1-9/16" Thru 4"
6mm to 100mm
Tolerance :
+0.000/-0.001. + +0.000/-0.0015"
Available in f7 , f8 , h7 , h8 , h9
Length : Up to 7 Mtrs
Product category: Bright steel, Hardening and tempering steel, Tool steel, Stainless steel
BRIGHT BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
BRIGHT BARS : STAINLESS STEEL | ALLOY STEEL | TOOL , CREEP & SPECIALITY STEELS.
Supply Condition : Cold Drawn & Polished , Peeled & Polished , Peeled & Ground , Peeled , Ground & Polished
Dia. Tolerances : h9 , h11 , k12 , k13
Sizes : 4.5mm to 150mm
Length : Up to 7 Mtrs
Supply Condition : Cold Drawn & Polished , Peeled & Polished , Peeled & Ground , Peeled , Ground & Polished
Dia. Tolerances : h9 , h11 , k12 , k13
Sizes : 4.5mm to 150mm
Length : Up to 7 Mtrs
Product category: Tool steel, Stainless steel, Hardening and tempering steel
SQUARE BARS: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
SQUARE BARS : STAINLESS STEEL | ALLOY STEEL | TOOL , CREEP & SPECIALITY STEELS.
Supply Condition : Hot Rolled / Cold Drawn
Sizes : 10mm to 70mm
Length : Up to 6.2 Mtrs
Supply Condition : Hot Rolled / Cold Drawn
Sizes : 10mm to 70mm
Length : Up to 6.2 Mtrs
Product category: Bright steel, Hardening and tempering steel, Tool steel, Stainless steel
FLAT BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
FLAT BAR : STAINLESS STEEL | ALLOY STEEL | TOOL , CREEP & SPECIALITY STEELS.
Supply Condition : Hot Rolled / Cold Drawn
Sizes : 30 x 8mm to 150 x 65mm
Length : 6.2 Mtrs
Supply Condition : Hot Rolled / Cold Drawn
Sizes : 30 x 8mm to 150 x 65mm
Length : 6.2 Mtrs
Product category: Bright steel, Hardening and tempering steel, Tool steel, Stainless steel
OCTAGON BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
OCTAGON BAR : STAINLESS STEEL | ALLOY STEEL | TOOL , CREEP & SPECIALITY STEELS.
Supply Condition : Cold Drawn
Sizes : 10mm to 55mm
Length : 6.2Mtrs
Supply Condition : Cold Drawn
Sizes : 10mm to 55mm
Length : 6.2Mtrs
Product category: Bright steel, Hardening and tempering steel, Tool steel, Stainless steel
HEXAGON BAR: STAINLESS STEEL | ALLOY STEEL | TOOL, CREEP & SPECIALITY STEELS.
HEXAGON BAR : STAINLESS STEEL | ALLOY STEEL |TOOL , CREEP & SPECIALITY STEELS.
Supply Condition : Hot Rolled / Cold Drawn
Sizes : 10mm to 57.50mm
Length : Up To 6.2 Mtrs
Supply Condition : Hot Rolled / Cold Drawn
Sizes : 10mm to 57.50mm
Length : Up To 6.2 Mtrs
About us
Company portrait
BRIGHT BARS : 1.4016, 1.4021, 1.4028, 1.4034, 1.4037, 1.4057, 1.4104, 1.4105, 1.4114, 1.4122, 1.4305, 1.4307, 1.4310, 1.4313, 1.4362, 1.4404, 1.4418, 1.4462, 1.4542, 1.4828, 1.4841, 1.4845, 1.4923
Company data
Sales volume
> 500 Mio US $
Export content
max. 75%
Number of employees
100-499
Area of business
- Automotive supply industry
- Iron, steel and non-ferrous metal industry