Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
ROLF SCHLICHT GmbH
Grootkoppel 16,
23858
Reinfeld
Germany
Germany
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Location
Hall map
Fairground map
Contact
Heiko Heynen
Managing Partner
Hans-Günter Mehls
Teamleader Sales
Thomas Heusler
Sales
Mark de Nooijer
Sales
Ghassen Ben Fredj
Teamleader Technic
Anja Möller
Secretary
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 02 Machinery for the processing of rods, wires and strips
- 02.05 Machinery for the surface treatment of wires and strips
- 02.05.04 Coating lines for wires
- 02.05.04.04 Other surface treatment lines
Other surface treatment lines
- 02 Machinery for the processing of rods, wires and strips
- 02.06 Machinery for the manufacture of cables
- 02.06.09 Powder-coating machines
Powder-coating machines
- 02 Machinery for the processing of rods, wires and strips
- 02.06 Machinery for the manufacture of cables
- 02.06.19 Haul-off devices for cables
- 02.06.19.02 Belt type haul-offs
Belt type haul-offs
- 02 Machinery for the processing of rods, wires and strips
- 02.06 Machinery for the manufacture of cables
- 02.06.19 Haul-off devices for cables
- 02.06.19.03 Caterpillar haul-offs
Caterpillar haul-offs
- 02 Machinery for the processing of rods, wires and strips
- 02.06 Machinery for the manufacture of cables
- 02.06.20 Cable stripping machines
Cable stripping machines
Our products
Product category: Powder-coating machines
RS POWDERTECH powder coating machine, model TALKATOR NG
TALKATOR – NEXT GENERATION (world’s first)
The TALKATOR “SPC” series for cables, hoses, wires and profiles is settled below the RSC NG line and shows its strength in slow-running, simple cable production as well as in the production of strands and profiles in the extrusion sequence in the rubber industry.
Especially in the rubber industry the TALKATOR has significant cost advantages, as the processes run at low speeds. This is made possible by the application of the
RS AirStreamTechnology, which avoids expensive brush solutions in most applications, but still provides very good coating results.
The powdering is done by 1-2 AST powder guns connected to up to two jet pumps. The newly developed coating technology RS AirStreamTechnology is able to achieve a very fine and even coating on the product at production speeds of up to 100 m/min, even without electrostatics.
The TALKATOR NG DR (drum roll) is used in the powdering of rubber molded parts or within the granule production.
Very good and fine coatings are achieved. As with the PBA/RSC/RSC NG, which has been successful for many years, the use of the new RS filter system ensures dust-free powdering.
There are cost advantages in your production, since the system can be integrated online into the continuous manufacturing process. Time-consuming manual powdering processes are no longer necessary.
The TALKATOR “SPC” series for cables, hoses, wires and profiles is settled below the RSC NG line and shows its strength in slow-running, simple cable production as well as in the production of strands and profiles in the extrusion sequence in the rubber industry.
Especially in the rubber industry the TALKATOR has significant cost advantages, as the processes run at low speeds. This is made possible by the application of the
RS AirStreamTechnology, which avoids expensive brush solutions in most applications, but still provides very good coating results.
The powdering is done by 1-2 AST powder guns connected to up to two jet pumps. The newly developed coating technology RS AirStreamTechnology is able to achieve a very fine and even coating on the product at production speeds of up to 100 m/min, even without electrostatics.
The TALKATOR NG DR (drum roll) is used in the powdering of rubber molded parts or within the granule production.
Very good and fine coatings are achieved. As with the PBA/RSC/RSC NG, which has been successful for many years, the use of the new RS filter system ensures dust-free powdering.
There are cost advantages in your production, since the system can be integrated online into the continuous manufacturing process. Time-consuming manual powdering processes are no longer necessary.
Product category: Powder-coating machines
RS POWDERTECH powder coating machine, model RSC-NG
We are constantly interested in innovations and improvements in order to be able to support the requirements in production by our equipment.
For 60 years, the RS POWDERTECH powdering machines type PBA/RSC of ROLF SCHLICHT GmbH are known for world-leading technology in this segment.
RSC NG – NEXT GENERATION
The RSC NG powder coating machine from the RS POWDERTECH series combines knowledge and development from 1959 to 2019.
By completely redeveloping the electrostatics and using new manufacturing processes, losses in the E-statics could be significantly reduced and the durability and reliability of the components could be improved. The redesign of the filter system leads to improved cleaning performance and reduced maintenance costs, since the number of wearing parts has been decreased. Overall, the well-known high powdering quality in terms of adhesive force was further improved with reduced maintenance costs and higher reliability.
The modular system allows adaptation to the specific application.
For 60 years, the RS POWDERTECH powdering machines type PBA/RSC of ROLF SCHLICHT GmbH are known for world-leading technology in this segment.
RSC NG – NEXT GENERATION
The RSC NG powder coating machine from the RS POWDERTECH series combines knowledge and development from 1959 to 2019.
By completely redeveloping the electrostatics and using new manufacturing processes, losses in the E-statics could be significantly reduced and the durability and reliability of the components could be improved. The redesign of the filter system leads to improved cleaning performance and reduced maintenance costs, since the number of wearing parts has been decreased. Overall, the well-known high powdering quality in terms of adhesive force was further improved with reduced maintenance costs and higher reliability.
The modular system allows adaptation to the specific application.
- Completely newly developed E-static system (higher adhesive force)
- Absolutely dust-free operation
- 1 – 4 powder pistols, 80 kV each pistol (real) or 1-4 pneumatic nozzles
- “Easy Change” filter system
- Better cleaning results, less wear parts
- Speeds up to 2.000 m/min.
- Optionally: powder flow control, free-standing powder chamber, 90 l powder hopper, fine dosing
Product category: Other surface treatment lines, Cable stripping machines
HUESTIS INDUSTRIAL air wipes and cable strippers
HUESTIS INDUSTRIAL air wipes used in the cable, wire and hose industry, i. e. behind the cooling bath for drying of extrudates. They are quiet, highly efficient and have paid for themselves in a short time, because the compressed air consumption is very low due to a special nozzle design.
Their design is based on the maximum utilization of the compressed air used. By means of Venturi effect additional ambient air is sucked in, which amplifies the drying effect and leads to low air consumption.
Due to the special construction of the housing and distribution of the high speed jets the noise emission is minimized.
The air wipes are available from 3 mm diameter up to 178 mm diameter. Special sizes and rectangular nozzles are available.
Due to their small size, they can easily be installed in any cooling section. The nozzles are mounted in stainless steel holders with snap fasteners. The compressed air connection is provided with a quick coupling.
For the passage of knots, thickenings, splicing, etc., the nozzles open independently, so that damages will be avoided.
HUESTIS INDUSTRIAL cable strippers are devices for stripping respectively skinning of cables and wires with core respectively conductor diameters from 0.8 to 100 mm. In many cases, the recovery of a cable drum is enough to make the machine pay for itself.
How it works
A hardened steel stripper foot sized closely to the core diameter separates the jacket from the core. The steel saw blade rides in a closed groove in the foot. Only the protective foot has contact with the core and makes a damage of it impossible.
Furthermore a combined puller-chopper (JPC) for the cut jacket is available. This cuts the jacket to pieces of abt. 200 to 300 mm length.
Advantages
- no damaging of the core
- stripping in the coiling stand
- cable guiding by stripper foot
- centering by roll guides
- two cut heads possible
- puller-chopper
- up to 75 m/min.
Product category: Belt type haul-offs, Caterpillar haul-offs
RS MULTICUT Modular cutting system, model MCS
The MCS is a modular system for the extrusion sequence, which can be delivered in different combinations. Different modes of operation and equipment options, depending on the material to be cut, can be adapted individually and according to your wishes.
The cutting module can be changed at any time without tools, depending on the material to be cut. We offer modules for die cut, shear cut, blade cut and tool cut. Completely individually according to your wishes.
The MCS modular system is prepared for additional peripheral devices as standard.
ADVANTAGES:
For more information on all machines of the RS MULTICUT series, please visit our homepage https://schlicht-gmbh.de/rs-multicut/ - Solutions for your cutting tasks.
The cutting module can be changed at any time without tools, depending on the material to be cut. We offer modules for die cut, shear cut, blade cut and tool cut. Completely individually according to your wishes.
The MCS modular system is prepared for additional peripheral devices as standard.
ADVANTAGES:
- MCS with modular system
- Wide range of available cutting technologies /die cut, shear cut, blade cut and tool cut
- Tool-free quick change of the cutting modules
- Setup time optimized
For more information on all machines of the RS MULTICUT series, please visit our homepage https://schlicht-gmbh.de/rs-multicut/ - Solutions for your cutting tasks.
Product category: Other surface treatment lines, Belt type haul-offs
RS MULTICUT CombiCutterHeating, model CCH-XX
The RS MULTICUT CombiCutterHeating CCH-XX (5-39 mm) is a combination cutting unit with an integrated heating tunnel for cutting brittle and tough-hard materials with perfect cuts for products of min. 5 to max. 39 mm diameter.
Hard materials sometimes have the property of splintering or generating cutting chips when they are chipped if cold.
By heating the material in the inline process, we achieve a clean and chip-free cut. There is no need for expensive post-processing.
Our heating tunnel works ideally in connection with our RS MULTICUT rotary cutter MC-NG.
The heat supply is speed controlled. In addition, an extremely fast on/off function is integrated so that the amount of heat can be precisely controlled.
Different heat levels are available for different polymer types, product sizes and line speeds.
All of our heating tunnels are fully safeguarded to protect the user and avoid the risk of fire.
Suitable polymers: impact-resistant, hard PVC, HDPE, PB, PP.
Hard materials sometimes have the property of splintering or generating cutting chips when they are chipped if cold.
By heating the material in the inline process, we achieve a clean and chip-free cut. There is no need for expensive post-processing.
Our heating tunnel works ideally in connection with our RS MULTICUT rotary cutter MC-NG.
The heat supply is speed controlled. In addition, an extremely fast on/off function is integrated so that the amount of heat can be precisely controlled.
Different heat levels are available for different polymer types, product sizes and line speeds.
All of our heating tunnels are fully safeguarded to protect the user and avoid the risk of fire.
Suitable polymers: impact-resistant, hard PVC, HDPE, PB, PP.
Product category: Caterpillar haul-offs, Belt type haul-offs
RS MULTICUT Caterpillar take-off – model RB NG
The caterpillars from the series RS MULTICUT were designed to provide or transport profiles, hoses, stranded profiles, pipes and cables without slip and deformation.
Depending on the production requirement, caterpillars with a contact length of 250, 600 And 1000 mm can be chosen.
The belts are driven by servo motors. In addition, an upper drive can be selected, to achieve a slip and deformation-free pull and an increased pulling force of the products.
The upper belt can be adjusted manually by handwheel or electrically to the product-dependent gap.
For better insertion of the products, the upper belt can be raised pneumatically by pressing a button.
For the various product materials different belt materials can be used. This guarantees a gentle deduction and transport.
ADVANTAGES:
Depending on the production requirement, caterpillars with a contact length of 250, 600 And 1000 mm can be chosen.
The belts are driven by servo motors. In addition, an upper drive can be selected, to achieve a slip and deformation-free pull and an increased pulling force of the products.
The upper belt can be adjusted manually by handwheel or electrically to the product-dependent gap.
For better insertion of the products, the upper belt can be raised pneumatically by pressing a button.
For the various product materials different belt materials can be used. This guarantees a gentle deduction and transport.
ADVANTAGES:
- Upper/lower belt synchronously driven
- Highest control accuracy of the feed rate
- Easy threading and handling
- Different caterpillars
- Fast belt change
Product category: Belt type haul-offs, Caterpillar haul-offs
RS MULTICUT rotary cutter, model MC NG
The RS MULTICUT rotary cutter, model MC NG is an extrusion downstream machine that is used in the plastics and rubber sector to cut profiles, hoses and solid extruded profiles. Other uses such as food etc. are possible.
The product is passed through a pair of cutting bushes that can be changed quickly. The position of the bushes is monitored by sensors.
The speed in continuous cutting operation depends on the selected product length, line speed and cutting speed of the cutting blade.
A PLC control ensures perfect length precision. All process parameters can be entered by means of a swiveling panel.
The rotary cutter can optionally be delivered movable, this way it can be used in the production line quickly and without major set-up effort. Depending on the profile being cut and the hardness of the material, different cutting blades and cutting bushes are used.
Segmented cutting bushes are offered to quickly meet customer requirements. They can usually be delivered within 2-3 weeks according to customer specifications. Even complex profile cross-sections can be produced very quickly without eroding.
If high demands are placed on a right-angled cut, the solution is called the clamp-cut bushes. Our newly developed, segmented clamp-cut bushes allow the material to be cut to be clamped and stopped for a short moment without intermittent loss of speed. This means that the material stands for a fraction of a second in the pair of cutting bushes. As a result, the tolerances are significantly smaller and the sectional view is optimized.
Advantages:
The product is passed through a pair of cutting bushes that can be changed quickly. The position of the bushes is monitored by sensors.
The speed in continuous cutting operation depends on the selected product length, line speed and cutting speed of the cutting blade.
A PLC control ensures perfect length precision. All process parameters can be entered by means of a swiveling panel.
The rotary cutter can optionally be delivered movable, this way it can be used in the production line quickly and without major set-up effort. Depending on the profile being cut and the hardness of the material, different cutting blades and cutting bushes are used.
Segmented cutting bushes are offered to quickly meet customer requirements. They can usually be delivered within 2-3 weeks according to customer specifications. Even complex profile cross-sections can be produced very quickly without eroding.
If high demands are placed on a right-angled cut, the solution is called the clamp-cut bushes. Our newly developed, segmented clamp-cut bushes allow the material to be cut to be clamped and stopped for a short moment without intermittent loss of speed. This means that the material stands for a fraction of a second in the pair of cutting bushes. As a result, the tolerances are significantly smaller and the sectional view is optimized.
Advantages:
- Newly developed double electronic cam disc
- Servo drive
- Highly precise length tolerance: 1% (depending on material)
- PLC by frequency converter
- Quick change of cutting bushes
- Rectangular clean cut
- Flexible to use: inline und offline
- Swiveling panel
- Standard for dry and wet cut
Product category: Belt type haul-offs, Caterpillar haul-offs
RS MULTICUT Combi Cutter, model CC NG
The combi-cutting system consists of the tried and tested caterpillar haul-off RB NG and the rotary cutter MC NG from the RS MULTICUT machine series for cutting plastic and rubber profiles / hoses to length. Both systems are perfectly coordinated.
In the caterpillar haul-off RB NG, a servo motor with digital drive controllers guarantees a precise and constant transport speed of the product. The speed signal is processed internally to control the integrated rotary cutter.
The rotary cutter is an extrusion downstream machine that is used in the plastics and rubber sector to cut profiles, hoses and solid extruded profiles. Other uses such as food etc. are possible.
The downstream rotary cutter MC NG works by means of an electronic cam disc application. Based on the production speed, the selected cutting speed and the target length, an optimized movement profile of the cutting blade is continuously calculated. This way the product is cut vertically and neatly between the two coordinated product guide bushes at max. cutting speed. This cam disc application combines the advantages of cyclical and continuous operation and guarantees an optimized length precision. All process-related parameters can be changed on the control panel during operation. The MC NG can be supplied for dry and wet cutting and optionally movable. This way the machine can be used in the production line quickly and without major set-up effort. Depending on the profile being cut and the hardness of the material, different cutting blades and cutting bushes are used.
The combi-cutting system can optionally be used in positioning mode. In this operating mode, the cut is made when the product is at a standstill. Made of stainless steel or in conformity with FDA.
ADVANTAGES:
In the caterpillar haul-off RB NG, a servo motor with digital drive controllers guarantees a precise and constant transport speed of the product. The speed signal is processed internally to control the integrated rotary cutter.
The rotary cutter is an extrusion downstream machine that is used in the plastics and rubber sector to cut profiles, hoses and solid extruded profiles. Other uses such as food etc. are possible.
The downstream rotary cutter MC NG works by means of an electronic cam disc application. Based on the production speed, the selected cutting speed and the target length, an optimized movement profile of the cutting blade is continuously calculated. This way the product is cut vertically and neatly between the two coordinated product guide bushes at max. cutting speed. This cam disc application combines the advantages of cyclical and continuous operation and guarantees an optimized length precision. All process-related parameters can be changed on the control panel during operation. The MC NG can be supplied for dry and wet cutting and optionally movable. This way the machine can be used in the production line quickly and without major set-up effort. Depending on the profile being cut and the hardness of the material, different cutting blades and cutting bushes are used.
The combi-cutting system can optionally be used in positioning mode. In this operating mode, the cut is made when the product is at a standstill. Made of stainless steel or in conformity with FDA.
ADVANTAGES:
- Newly developed double electronic cam disc
- Servo drive
- Highly precise length tolerance: 1% (depending on material)
- PLC control by frequency converter
- Quick change of cutting bushes
- Rectangular clean cut
- Optionally with stop & go cut or continuous cut
- Low space requirement
- Flexible to use: inline and offline
- Swiveling panel
- Standard for dry and wet cut
Product category: Belt type haul-offs, Caterpillar haul-offs
RS MULTICUT Orbital cutter, model OC NG
The orbital cutter RS MULTICUT OC NG is suitable for semi-hard and hard pipes with a diameter of 5 to 70 mm.
The system is characterized by a clean, chip-free and right-angled cut and is used for precise and fast cutting of semi-hard and hard pipes made of plastic, rubber, plastic composite with aluminum, copper pipe inside, rubber with Kevlar, etc. The cut is done on the fly.
Thanks to a standard servo linear drive for the tool carrier, the moving cutting unit achieves excellent cutting quality and, at the same time, extremely short cycle times of around 1-2 seconds for processing high line speeds.
All important cutting parameters can be adjusted in the control during the process and optimized according to requirements. The new OC NG extrusion downstream machine is offered in the usual quality, but now at a particularly attractive price. This model is also available as highspeed version OC NG HS.
A revolutionary cutting system instead of saws, guillotines etc.
The system is characterized by a clean, chip-free and right-angled cut and is used for precise and fast cutting of semi-hard and hard pipes made of plastic, rubber, plastic composite with aluminum, copper pipe inside, rubber with Kevlar, etc. The cut is done on the fly.
Thanks to a standard servo linear drive for the tool carrier, the moving cutting unit achieves excellent cutting quality and, at the same time, extremely short cycle times of around 1-2 seconds for processing high line speeds.
All important cutting parameters can be adjusted in the control during the process and optimized according to requirements. The new OC NG extrusion downstream machine is offered in the usual quality, but now at a particularly attractive price. This model is also available as highspeed version OC NG HS.
A revolutionary cutting system instead of saws, guillotines etc.
Company news
Date
Topic
27 Jan 2022
F.lli MARIS SpA, Italy – Our partner at Wire 2022
We are pleased to announce that with F.lli Maris SpA, Italy we have gained another competent partner in the field of extrusion. ROLF SCHLICHT GmbH is the representative for Germany and Austria since 2021.
F.lli Maris SpA manufactures co-rotating twin-screw extruders for plastics and rubber which are used for high-quality compounding of plastics and rubber as well as for recycling or upcycling processes.
Already since the beginning of the 60's F.lli Maris SpA has played a leading role in the compounding sector. The constant research and long experience make F.lli Maris SpA one of the leading companies in this sector at international level.
Maris also offers solutions for the production of cable compounds and will be represented for the first time at Wire 2022 in Düsseldorf at our booth in hall 12/A48. Learn more about the application possibilities of F.lli Maris SpA products.
Of course, we will be available to answer any questions you may have prior to the start of the trade fair.
Contact: Hans-Günter Mehls
Phone: +49 4533 6063-100
E-mail: info@schlicht-gmbh.de
F.lli Maris SpA manufactures co-rotating twin-screw extruders for plastics and rubber which are used for high-quality compounding of plastics and rubber as well as for recycling or upcycling processes.
Already since the beginning of the 60's F.lli Maris SpA has played a leading role in the compounding sector. The constant research and long experience make F.lli Maris SpA one of the leading companies in this sector at international level.
Maris also offers solutions for the production of cable compounds and will be represented for the first time at Wire 2022 in Düsseldorf at our booth in hall 12/A48. Learn more about the application possibilities of F.lli Maris SpA products.
Of course, we will be available to answer any questions you may have prior to the start of the trade fair.
Contact: Hans-Günter Mehls
Phone: +49 4533 6063-100
E-mail: info@schlicht-gmbh.de
About us
Company portrait
ROLF SCHLICHT GmbH – Quality and competence since 1959
ROLF SCHLICHT GmbH is manufacturer of the RS POWDERTECH powder coating machines and RS MULTICUT cutting systems. Our machines have been successfully in use worldwide for 60 years.
The RS POWDERTECH electrostatic and pneumatic powder coating systems stand for absolutely dust-free and finely dosed powdering of cables, wires, hoses, profiles and tapes with powdering agents such as talc, graphite, stearates, swelling powders, organic powders, colour powders etc. Their use results in a clean environment that protects workers as well as machines and aggregates.
Depending on the product specification, either the RSC NG, successor to the RSC / PBA powdering machine that has been used successfully for many years, or the new development from the TALKATOR NG series are used.
With the RS MULTICUT series, ROLF SCHLICHT GmbH offers a wide range of system solutions for versatile cutting tasks in the extrusion sequence. Where cutting is not required, a comprehensive range of semi- or fully automatic winders with strapping, tying, shrinking as well as ejecting or depositing systems on pallets or conveyor belts is available.
The field of application for our systems is the production sector of plastic and rubber extrusion for the manufacturing of hoses, tubes, profiles, strips from the smallest diameter range of less than 1 mm in medical technology up to tubes of approx. 100 mm diameter.
We also supply our feeding and cutting systems in GMP design for the pharmaceutical industry and medical technology for the clean room. The systems work in the extrusion line or also outside the line from the coil, the winder or the pallet.
The systems can be adapted to the customer's wishes and needs in order to achieve the best possible effectiveness.
Our service guarantees the fast delivery of machines and spare parts as well as technical assistance, also on site.
A well-organized sales network in more than 60 countries guarantees a smooth procurement process thanks to the know-how of the local market.
USD Gebrauchtmaschinen für Gummi und Kunststoff GmbH is the subsidiary of ROLF SCHLICHT GmbH founded in 1982. This company is mainly engaged in distribution and sale of used or reconditioned machines and equipment for the rubber industry, but also offers selected new machines.
We further completed our product portfolio with ARISTO Cutting Solutions GmbH. The company has been part of our group of companies since 2021 and offers cutting solutions for cutting in production. The flatbed cutters have been used successfully for decades for textile materials in the transportation, automotive and aviation sectors. Both in individual and in series production. The high quality of the solutions enables reliable and highly precise processing of composites such as carbon, prepreg, fiberglass and other fiber composites.
ARISTOMAT cutters are increasingly used in research, production and development because of their suitability for cutting composite semi-finished products in a wide variety of designs and fabric structures.
SCHLICHT DELIVERY PROGRAM OVERVIEW:
RS POWDERTECH: RSC NG modular system for electrostatic powder coating machines for cables, hoses, profiles and bands.
Talkator NG SPC for a dust-free powdering of cables, hoses, wires and profiles in very slow running processes.
Talkator NG DR for powdering rubber molded parts or granules.
RS MULTICUT: Cutting systems, caterpillar haul-offs, extrusion downstream equipment. Cutting machines, type MC-NG, orbital cutter OC-NG for pipes, scissor cutting system.
NEW: Modular cutting system MCS - modular construction, for different belt widths and contact lengths.
RS MACHINE CONSTRUCTION: Special machines for the rubber, cable and plastics industry.
ARISTO Cutting Solutions GmbH: Flatbed cutters for textile materials in the transportation, automotive and aviation sectors.
USD Gebrauchtmaschinen GmbH: Used machinery for the rubber and plastics industry. New presses at good prices. Overhauling of machines.
HUESTIS INDUSTRIAL, USA: Air wipes for blowing and drying, cable strippers with feeding and cutting systems.
Sagitta S.p.A., Italy: Band granulators, transport and depowdering systems. Rubber and plastic slitting machine.
Friul Filiere S.p.A, Italy: Extruders and extrusion plans for plastic profiles, sheets, bands and pipes.
NorMec, Norway: Joining and splicing systems for profiles, rings etc. Vulcanizing materials, moulds, handling systems.
Battaggion S.p.A, Italy: Sigma and Z-kneaders, granulating systems, turbomixers, high speed mixers, vacuum dryers, planet mixers as well as double screw extruders, mixing mills, extruders for silicone processing.
Molteni S.R.L., Italy: Mixing technology for the chemical industry, food, pharma industry, cosmetics, rubber and plastics. A subsidiary of the Battaggion group.
Valtorta S.R.L., Italy: Turbo mixer, high speed mixer, vacuum dryer, mixing lines, kneader and planetary mixer. A subsidiary of Battaggion group.
PUMATECH S.R.L., Italy: Rubber-bale cutters, strip cutters, cryogenic deflashing systems.
Wallace Instruments Co. Ltd., Great Britain: Instruments and test equipment for rubber to measure physical properties such as hardness, plasticity, viscosity, curing, compression, etc.
F.lli MARIS S.p.A., Italy: Co-rotating twin-screw extruders for plastic and rubber, used for high-quality compounding of plastics and rubber and for recycling or upcycling processes.
Valmet – Lektar Oy, Finnland: Cable pulling belts for caterpillars and pullers to manufacture electric cables.
Fontijne Pressen, The Netherlands: Hydraulic laboratory presses for quality control in research and development, factories, laboratories and universities worldwide.
PLASTIBLOW S.R.L., Italy: Electric blow molding machines for food packaging, cosmetics, pharmaceuticals, industrial chemicals or detergents.
ROLF SCHLICHT GmbH
Sales Team
Tel. +49 4533 6063-100
E-Mail: sales@schlicht-gmbh.de
ROLF SCHLICHT GmbH is manufacturer of the RS POWDERTECH powder coating machines and RS MULTICUT cutting systems. Our machines have been successfully in use worldwide for 60 years.
The RS POWDERTECH electrostatic and pneumatic powder coating systems stand for absolutely dust-free and finely dosed powdering of cables, wires, hoses, profiles and tapes with powdering agents such as talc, graphite, stearates, swelling powders, organic powders, colour powders etc. Their use results in a clean environment that protects workers as well as machines and aggregates.
Depending on the product specification, either the RSC NG, successor to the RSC / PBA powdering machine that has been used successfully for many years, or the new development from the TALKATOR NG series are used.
With the RS MULTICUT series, ROLF SCHLICHT GmbH offers a wide range of system solutions for versatile cutting tasks in the extrusion sequence. Where cutting is not required, a comprehensive range of semi- or fully automatic winders with strapping, tying, shrinking as well as ejecting or depositing systems on pallets or conveyor belts is available.
The field of application for our systems is the production sector of plastic and rubber extrusion for the manufacturing of hoses, tubes, profiles, strips from the smallest diameter range of less than 1 mm in medical technology up to tubes of approx. 100 mm diameter.
We also supply our feeding and cutting systems in GMP design for the pharmaceutical industry and medical technology for the clean room. The systems work in the extrusion line or also outside the line from the coil, the winder or the pallet.
The systems can be adapted to the customer's wishes and needs in order to achieve the best possible effectiveness.
Our service guarantees the fast delivery of machines and spare parts as well as technical assistance, also on site.
A well-organized sales network in more than 60 countries guarantees a smooth procurement process thanks to the know-how of the local market.
USD Gebrauchtmaschinen für Gummi und Kunststoff GmbH is the subsidiary of ROLF SCHLICHT GmbH founded in 1982. This company is mainly engaged in distribution and sale of used or reconditioned machines and equipment for the rubber industry, but also offers selected new machines.
We further completed our product portfolio with ARISTO Cutting Solutions GmbH. The company has been part of our group of companies since 2021 and offers cutting solutions for cutting in production. The flatbed cutters have been used successfully for decades for textile materials in the transportation, automotive and aviation sectors. Both in individual and in series production. The high quality of the solutions enables reliable and highly precise processing of composites such as carbon, prepreg, fiberglass and other fiber composites.
ARISTOMAT cutters are increasingly used in research, production and development because of their suitability for cutting composite semi-finished products in a wide variety of designs and fabric structures.
SCHLICHT DELIVERY PROGRAM OVERVIEW:
RS POWDERTECH: RSC NG modular system for electrostatic powder coating machines for cables, hoses, profiles and bands.
Talkator NG SPC for a dust-free powdering of cables, hoses, wires and profiles in very slow running processes.
Talkator NG DR for powdering rubber molded parts or granules.
RS MULTICUT: Cutting systems, caterpillar haul-offs, extrusion downstream equipment. Cutting machines, type MC-NG, orbital cutter OC-NG for pipes, scissor cutting system.
NEW: Modular cutting system MCS - modular construction, for different belt widths and contact lengths.
RS MACHINE CONSTRUCTION: Special machines for the rubber, cable and plastics industry.
ARISTO Cutting Solutions GmbH: Flatbed cutters for textile materials in the transportation, automotive and aviation sectors.
USD Gebrauchtmaschinen GmbH: Used machinery for the rubber and plastics industry. New presses at good prices. Overhauling of machines.
HUESTIS INDUSTRIAL, USA: Air wipes for blowing and drying, cable strippers with feeding and cutting systems.
Sagitta S.p.A., Italy: Band granulators, transport and depowdering systems. Rubber and plastic slitting machine.
Friul Filiere S.p.A, Italy: Extruders and extrusion plans for plastic profiles, sheets, bands and pipes.
NorMec, Norway: Joining and splicing systems for profiles, rings etc. Vulcanizing materials, moulds, handling systems.
Battaggion S.p.A, Italy: Sigma and Z-kneaders, granulating systems, turbomixers, high speed mixers, vacuum dryers, planet mixers as well as double screw extruders, mixing mills, extruders for silicone processing.
Molteni S.R.L., Italy: Mixing technology for the chemical industry, food, pharma industry, cosmetics, rubber and plastics. A subsidiary of the Battaggion group.
Valtorta S.R.L., Italy: Turbo mixer, high speed mixer, vacuum dryer, mixing lines, kneader and planetary mixer. A subsidiary of Battaggion group.
PUMATECH S.R.L., Italy: Rubber-bale cutters, strip cutters, cryogenic deflashing systems.
Wallace Instruments Co. Ltd., Great Britain: Instruments and test equipment for rubber to measure physical properties such as hardness, plasticity, viscosity, curing, compression, etc.
F.lli MARIS S.p.A., Italy: Co-rotating twin-screw extruders for plastic and rubber, used for high-quality compounding of plastics and rubber and for recycling or upcycling processes.
Valmet – Lektar Oy, Finnland: Cable pulling belts for caterpillars and pullers to manufacture electric cables.
Fontijne Pressen, The Netherlands: Hydraulic laboratory presses for quality control in research and development, factories, laboratories and universities worldwide.
PLASTIBLOW S.R.L., Italy: Electric blow molding machines for food packaging, cosmetics, pharmaceuticals, industrial chemicals or detergents.
ROLF SCHLICHT GmbH
Sales Team
Tel. +49 4533 6063-100
E-Mail: sales@schlicht-gmbh.de
Company data
Foundation
1959
Area of business
- Wire industry
- Cable industry
- Measuring and control technology
- Chemical industry
- Trade, technical specialist retail trade
- Services
