Manage stand orders
Select Option

SAS Inc.

P.O. Box 2561, 4365006 Raanana
Hasadnah 11, 4365006 Raanana
Israel
Telephone +972 9 7603895
Fax +972 9 7604849
info@sastesters.com

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Hall map

wire 2022 hall map (Hall 16): stand A12

Fairground map

wire 2022 fairground map: Hall 16

Contact

Martin Somers

Phone
+972527382317

Email
martin@sastesters.com

Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Our range of products

Product categories

  • 05  Testing technology, sensor technology and quality assurance for the wire and cable industry
  • 05.02  Product testing
  • 05.02.18  Testing machines for springs

Testing machines for springs

Our products

Product category: Testing machines for springs

CT series C-frame testers

  • C-Frame programmable tension and compression spring testers with small footprint
  • Model capacities from 10N to 10000N
  • The CT-Series spring tester is a servo-controlled, PC-driven C-Frame tester that connects externally to a PC via USB and has the following key features
  1. Extension and compression modes
  2. Load capacity: models from 10N capacity to 10000N capacity
  3. Accuracy: ISO 7500/1 class 0.5
  4. Standard stroke 200mm, HS stroke 500mm
  5. stroke accuracy 0.01mm, 0.001mm (HS models)
  6. Plate diameter: Ø55mm, Ø80mm and Ø120mm according to models

More Less

Product category: Testing machines for springs

CT Series H Rack Large Capacity PC Controlled Servo Driven Spring Testers

  • H-frame design with two and four ball screws - high capacity - programmable tension and compression testers
  • Includes new HS technology. (High speed/high resolution)
  • CT-50000, CT-100000 and CT-200000 testers come standard with three load cells with extreme offset, the other testers are optional
  • The CT-Series spring tester is a servo-controlled, PC-controlled H-frame tester with the following key features:
  1. Extension and compression modes
  2. Load capacity: models from 10000N capacity to 200000N capacity
  3. Accuracy: ISO 7500/1 class 0.5
  4. Standard stroke 1000mm, (Available option stroke 1500mm)
  5. Stroke accuracy 0.01mm
  6. Plate diameter: Ø300mm and Ø400mm for models CT50000 and larger

More Less

Product category: Testing machines for springs

Fully automatic ALT series loading, setting, testing, sorting and packaging systems

Fully automatic systems for loading, setting, testing, sorting and packing
Fully programmable
- Servo driven force testing station - Multiple force measurement at different heights
- Programmable setting station
- 3-way or 5-way sorter available.
- Part loading mechanism available for integration with tray feeding or automatic loading systems.
- Maximum throughput 3000 parts per hour; (depending on system configuration).

More Less

Product category: Testing machines for springs

Torsion spring, arc spring and bar testers - T series. Programmable servo driven torsion testers

  • Programmable torsion spring/torque bar and arc spring testers. Models available from 0.01NM - 500NM capacity
  • High speed model offers a combination of high speed motion and high resolution for accurate positioning
  • Fatigue testing is possible with the HS models.
  • interchangeable torque cells are available

More Less

Product category: Testing machines for springs

CTV1600 series: Programmable vision measurement for squareness (E1), parallelism (E2), free length (Lo), outside diameter, concentricity and pitch of spiral springs

  • The CTV-1600 series are programmable vision measuring systems that measure the following parameters:
  1. Perpendicularity (E1),
  2. Parallelism (E2),
  3. Free length (Fl),
  4. Outer Diameter (OD),
  5. Concentricity,
  6. Pitch distance
  7. itch height
FEATURES
  • All models include a motorized W-axis with 0.1 degree position accuracy
  • Excellent R&R performance
  • SPC control charts, analysis and reports
  • 3 Mpixel, 5 Mpixel or 10 Mpixel Cmos Telecentric camera and lens on all models
  • Models available to measure springs with diameters from 0.2 mm to 120 mm.
  • Models with motorized Z-axis are available for part lengths up to 200 mm and allow measurement of large springs.

More Less

Product category: Testing machines for springs

CTV2000 Series Programmable Vision Measurement of 2D and 3D Parts

  • FEATURES:
  • programmable vision measurement of 2D and 3D parts
  • automatic and manual part recognition
  • multi-part inspection for 2D and 3D parts measurement
  • programmable from DXF CAD files
  • part sizes from 0.12mm to (160X180mm)

More Less

Product category: Testing machines for springs

Programmierbare PC-gesteuerte Druck-/Dehnungs-Lebensdauerprüfgeräte (Ermüdungsprüfgeräte) der LST-Serie

Die PC-Modelle der LST-Serie umfassen:

-6 oder 12 Kanäle zur gleichzeitigen Lastüberwachung.
-Unbeaufsichtigte, programmierbare Lösung für Ermüdungsprüfungen.
-Unterstütztes Einrichten mit Höhenmessgeräten.
-Berichterstattungsmodul.

More Less

Product category: Testing machines for springs

TFT Programmable PC Controlled Torsion Cycle (Fatigue) Tester

Features
Endless angular rotation available with speeds up to 300 rpm
Up to 6 channels per tester, including torque cells for continuous torque measurement and reporting
Optional temperature control units with air-heated temperatures up to 250 degrees C.

More Less

Product category: Testing machines for springs

CFT Series Large Stroke Compression/Extension Life/Fatigue Testers

  • Up to 1500mm (40″) stroke
  • Up to 133mm/sec linear speed
  • PC controlled with load cells at each station for load monitoring and reporting.

More Less

Product category: Testing machines for springs

ALS Series Fully Automatic Spring Setters (Scragger)

Fully programmable spring setting system (scragging).
- Pneumatic setting station - multiple sets available
- 2000N and 5000N setting forces available
- Part loading mechanism available for integration with tray loading or automatic loading systems
- Maximum throughput of 5000 parts per hour (depending on system configuration)

More Less

Product category: Testing machines for springs

LS series - Pnuematic adjustment systems with large compression spring

-Adjustment forces up to 20000N (4485lbf)
-Stroke lengths up to 500mm (20")
- Adjustment to height or fixed settings
-Safety door lock

More Less

Product category: Testing machines for springs

MODULE LVA (Load Vector Analysis)

The LVA module measures and displays the magnitude of the resultant force and its vector direction, including the in-plane load and the position of the vector penetration The LVA module is available for the following testers
  1. CTHS series (C-FRAME) 500N capacity and larger
  2. CT series (H-frame) all models
  3. CTPC series, 500N capacity and larger

More Less

Product category: Testing machines for springs

CT Series C-Frame - Tester for small and medium spring forces

The CT series spring test stands with C-frame are compact, programmable test devices and can be used for both tension and compression spring tests.
Matching the application, the spring test stands can be configured for maximum forces from 10 N to 10 000 N.
The test benches are controlled by the PC through a USB interface or a serial port. The SAS software allows free programming of the test sequence and creation of individual test protocols. The possibility of data export via .csv format allows individual further processing of the data.
Technical features:
  • maximum spring force 10 N to 10 000 N
  • Measuring height 200 mm or 500 mm (HS version), 1000 mm on request
  • Position accuracy 0.01 mm or 0.001 mm (HS version)
  • low-friction servo spindle drive
  • Data interfaces: USB, RS232
  • Format for data export: .csv, programmable
- Check springs, - check compression springs, - test compression springs, - adjust compression springs, - check extension springs, - test extension springs
- Tension spring adjustment

More Less

Product category: Testing machines for springs

ALT Series - Automated Spring Testing Systems

ALT series spring testers offer the possibility of fully automatic assembly, adjustment, testing, sorting and packaging, as well as integration of product testing into the manufacturing process.
  • freely programmable
  • servo driven spring shaft test stand - multiple force measurement in different measuring heights
  • programmable adjustment function
  • Triple or quintuple sorting system available
  • Partial loading mechanism available, for integration into a bulk feeder or automatic loading system
  • maximum throughput 3000 pieces per hour (depending on system configuration)

- Spring testing, - compression spring testing, - compression spring adjustment, - tension spring testing,
- Tension spring testing, -tension spring adjustment, -automatic spring testing

More Less

Product category: Testing machines for springs

T Series - Spring Tester for Torsion Springs and Arc Springs

  • freely programmable spring testers for torsion and arc springs
  • maximum spring force 0.01 Nm - 500 Nm
  • HS (High Speed) version with especially fast deflection and high resolution for precise positioning
  • optional measurement of internal stresses (for HS version)
  • interchangeable torque load cells to extend the measuring range of your spring tester

- Testing of torsion springs, - setting of torsion springs, - torsiometer

More Less

Product category: Testing machines for springs

CTV1600 series - optical spring measurement

  • CTV-1600 series gauges are programmable optical contour gauges. They can be used to check the following parameters of the springs:
Perpendicularity (E1),
Parallelism (E2),
Free length (L0),
Outer diameter (Da),
Concentricity,
Distance between coils,
Height of coils.

Features
  • Rotation of the spring to be measured by servo drive with a positional accuracy of 0.1°
  • Excellent R&R performance
  • SPC (Statistical Process Control) diagrams, analysis and reports
  • 3 Mpixel, 5 Mpixel or 10 Mpixel CMOS digital camera with telecentric lens in all versions
  • Measurement of springs with diameters from 0.2 mm to 120 mm, depending on the version.
Optional height adjustment available in the Z-axis for measuring large springs up to 200 mm long.

More Less

Product category: Testing machines for springs

CTV2000 series - programmable optical measurement of 2D and 3D parts

Features
  • programmable optical measurement of 2D and 3D parts
  • automatic and manual part recognition
  • Inspection of several 2D and 3D parts in one measuring process possible
  • Programming via DXF CAD data
  • Size of parts from 0,12 mm up to dimensions of 160 mm on 180 mm

More Less

Product category: Testing machines for springs

LST Series - Programmable Automatic Tension/Compression Life Test

Features
  • simultaneous service life testing via 6 or 12 load measurement channels
  • Test program sequence without operator supervision
  • Guided setup of components with height measurement
  • internal report module for the generation of life test reports
- Service life testing, - fatigue testing

More Less

Product category: Testing machines for springs

TFT Series - Programmable Automated Torsional Motion Life Testing

Features
  • Rotational movement optionally without end stop and with speeds up to 300 1/min
  • up to 6 channels per test unit with torque transducers for continuous torque measurement and recording
  • on request with integrated temperature control unit with air temperature performance up to 250° C
- Service life testing, - fatigue testing

More Less

Product category: Testing machines for springs

CFT Series - Tension/Compression Life Testing for Long Stroke Components

Features:
  • Strokes up to 1500 mm (40″) possible
  • Stroke speed up to 133 mm/s
  • PC controlled with force transducers on each fixture to capture and record forces
- Service life testing, - fatigue testing

More Less

Product category: Testing machines for springs

LS series - programmable fully automatic spring setting device for large springs

Features:
  • pneumatic actuation
  • Actuating force up to 20 000 N
  • Stroke up to 500 mm (20")
  • programmable setting height or setting "on block
  • reinforced safety door

- Adjustment systems
- Spring adjustment

More Less

Product category: Testing machines for springs

LVA Module (Load Vector Analysis)

The LVA module measures and calculates the resultant force and its vector direction. The vector, the forces in the XY plane and the resulting piercing point of the vector in the XY plane are displayed graphically with the coordinates.
The LVA module is optionally available for the following spring test stands:
  • CT HS series (C-frame) from 500 N maximum measuring force
  • CT series (H-frame) for all models
  • CT PC series from 500 N max. measuring force

More Less

About us

Company portrait

Spring Analysis Systems (SAS Inc. ), commonly referred to as SASTESTERS, was founded in 2001 by Larry Sheiman and Martin Somers, who are both aerospace engineers with many years of experience in the hi-tech industry.

SAS Inc./strong> exhibited its first products at CASMI in Chicago in 2002. These products included the world's first spring tester fully controlled by a pocket PC.

Just a few years later, SAS Inc./strong> is exhibiting a full range of equipment that includes five product families. These product families include the various models of compression, tension and torsion testers, life cycle and fatigue testers, as well as the latest line of visual inspection equipment for both axially symmetrical parts and 2- and 3-D wire forms.

Although



SAS Inc.

/strong> originally developed its products for the wire and spring industry, other industries have successfully adapted these product families for a variety of applications



SAS Inc.



#8217;s creativity in in-house software development has enabled its equipment to serve a wide range of industries, from aerospace to automotive to medical.